Designed to fit on one or two piece pistons, this piston seal employs a nitrile seal for high sealability, nylon split back-ups for extrusion resistance, and two split bearing rings. No further support bearings required.
| SEAL INFORMATION | |
|---|---|
| MATERIAL | 90A NITRILE SEAL NYLON BACK-UP NYLON BEARING |
| TEMPERATURE RANGE | -22° to +212° F |
| PRESSURE RANGE | 0 to 6,000 PSI |
| MAXIMUM SPEED | 1.5 Ft/Sec. |
| PART NUMBER | (Prefix) – (Size) |
