| SEAL INFORMATION | |
|---|---|
| MATERIAL | 95A DUROMETER URETHANE |
| TEMPERATURE RANGE | -40° to +200° F |
| PART NUMBER | (Prefix) - (ID) x (CS) x (W) |
| SCS PART NUMBERS | ||||||
|---|---|---|---|---|---|---|
| MBU | - | 6 | X | 2 | X | 1.3 |
| Type of Seal | Inside Diameter |
Cross Section |
Width | |||
-
-
Commonly used with metric o-rings, these back-up rings are made of virgin PTFE unless suffix specifies otherwise.
STANDARD IS VIRGIN PTFE
G = GLASS FILLED PTFE
B = BRONZE FILLED PTFE
CG = CARBON GRAPHITE FILLED PTFE
S = SPLIT RINGSEAL INFORMATION MATERIAL PTFE TEMPERATURE RANGE -100° to +500° F PART NUMBER (Prefix) - (ID) x (CS) x (W) SCS PART NUMBERS MBT - 3 X 1.5 X 1.25 Type of Seal Inside
DiameterCross
SectionWidth -
These back-up rings, made from urethane or nylon, are commonly used as spacers for u-seals.
SEAL INFORMATION MATERIAL URETHANE, 70 SHORE D TEMPERATURE RANGE -40° to +250° F SPEED 3 FT/SEC PART NUMBER (Prefix) (CS) - (ID) - (Width) N = Nylon
S = Split
P = Hard Hytrel