| SEAL INFORMATION | |
|---|---|
| MATERIAL | 90 DUROMETER, BUNA-N RUBBER |
| TEMPERATURE RANGE | -40° TO +240°F |
| PRESSURE RANGE | VARIES ACCORDING TO DIAMETRAL CLEARANCE |
| PART NUMBER | (prefix) (Dash No.) (90 Duro Fluorocarbon) |
| SEAL INFORMATION | |
|---|---|
| MATERIAL | FLUOROCARBON |
| TEMPERATURE RANGE | -20° TO +400° F |
| PRESSURE RANGE | VARIES ACCORDING TO DIAMETRAL CLEARANCE |
| PART NUMBER | (Prefix) - (Dash No.) - (90 Duro Fluorocarbon) |
| SEAL INFORMATION | |
|---|---|
| MATERIAL | BUNA-N RUBBER |
| TEMPERATURE RANGE | -40° TO +240°F |
| PRESSURE RANGE | VARIES ACCORDING TO DIAMETRAL CLEARANCE |
| PART NUMBER | (prefix) - (Dash No.) |
| SEAL INFORMATION | |
|---|---|
| MATERIAL | BUNA-N RUBBER |
| TEMPERATURE RANGE | -40° TO +240°F |
| PRESSURE RANGE | VARIES ACCORDING TO DIAMETRAL CLEARANCE |
| PART NUMBER | (prefix) - (Dash No.) |
| SEAL INFORMATION | |
|---|---|
| MATERIAL | BUNA-N RUBBER |
| TEMPERATURE RANGE | -40° TO +240°F |
| PRESSURE RANGE | VARIES ACCORDING TO DIAMETRAL CLEARANCE |
| PART NUMBER | (prefix) (Cord) - (Nom. Size) (Fluorocarbon) |
| SEAL INFORMATION | |
|---|---|
| MATERIAL | BLACK FLUOROCARBON |
| TEMPERATURE RANGE | -20° TO +400°F |
| PRESSURE RANGE | VARIES ACCORDING TO DIAMETRAL CLEARANCE |
| PART NUMBER | (Prefix) (Cord) - (Nom. Size.) (Fluorocarbon) |
| SEAL INFORMATION | |
|---|---|
| MATERIAL | BUNA-N RUBBER |
| TEMPERATURE RANGE | -40° TO +240° F |
| PRESSURE RANGE | VARIES ACCORDING TO DIAMETRAL CLEARANCE |
| SPEED | 3 FT/SEC |
| PART NUMBER | (Prefix) - (Dash No.) |
Flexible Guide Bearings are strips of filled PTFE. The material can be cut to any length to fit any rod or bore size without losing its concentricity. The filler material is shown below. NOTE: Glass filled material has a thickness tolerance of ±_.010 in. Bronze filled tolerance is ± .0025 in.
| SEAL INFORMATION | |
|---|---|
| MATERIAL | GLASS FILLED 60% BRONZE FILLED PTFE |
| TEMPERATURE RANGE | -50° to +400° F |
| TENSILE STRENGTH | 2,100 PSI |
| COMPRESSIVE STRENGTH | 1,500 PSI |
| SPEED | 12 FT/SEC |
| PART NUMBER | (Prefix) - (Width) |
| B = Bronze Filled PTFE | |
Our 612F style flexible guide bearings, with a 1/8" radial thickness, offered in a boxed quantity. The strip can be cut to any length using anvil type pruning shears. Product length is 32' per box.
| SEAL INFORMATION | |||
|---|---|---|---|
| MATERIAL | FABRICATED REINFORCED POLYESTER | ||
| TEMPERATURE RANGE | -40° to +250° F | ||
| TENSILE STRENGTH | 8,000 PSI | ||
| COMPRESSIVE STRENGTH | 24,000 PSI | ||
| SPEED | 3 FT/SEC | ||
| PART NUMBER | (Prefix) - (W) x (TH) | ||
Manufactured using woven fabric-reinforced polyester resin, this material produces a dimensionally accurate rectangular strip which can be cut to any length. Low coefficient of friction and high compressive strength makes it an ideal bearing material. A common radial thickness of 1/8 in. allows the stacking of various widths. Size reference is marked every 6 in. on the strip. Available by the foot or rolls of 16 feet. Cutting is made easy by using Anvil type pruning shears. Wall tolerance ± .002 in., radial wall thickness = 0.124 to 0.121 in. Standard part numbers are gray in color.
TQ = Turquoise in color.| SEAL INFORMATION | |
|---|---|
| TEMPERATURE RANGE | -40° to +250° F |
| TENSILE STRENGTH | 8,000 PSI |
| COMPRESSIVE STRENGTH | 24,000 PSI |
| SPEED | 3 FT/SEC |
| PART NUMBER | (Prefix) - (Width) |
Style 614 rod bearings are available in nylon material. These products are used extensively in hydraulic cylinders due to their low rate of wear and non-scoring properties. Excellent for those heavy duty applications that require a sturdy bearing. Most of these bearings are solid, although some may be split.
| SEAL INFORMATION | |
|---|---|
| TEMPERATURE RANGE | -40° to +275° F |
| TENSILE STRENGTH | 25,000 PSI |
| COMPRESSIVE STRENGTH | 26,000 PSI |
| PART NUMBER | (Prefix) - (ID) - (Width) |
| SEAL INFORMATION | |
|---|---|
| TEMPERATURE RANGE | -40° to +250° F |
| TENSILE STRENGTH | 10,600 PSI |
| COMPRESSIVE STRENGTH | 34,000 PSI |
| SPEED | 3 FT/SEC |
| PART NUMBER | (Prefix) - (OD) (CS) - (Width) |
| SEAL INFORMATION | |
|---|---|
| TENSILE STRENGTH | 35,000 PSI |
| YIELD STRENGTH | 18,000 PSI |
| PART NUMBER | (Prefix) - (ID) (CS) - (Width) |
Suffix 'SH' designates slotted heel design, 'V' designates fluorocarbon material, and 'B' designates carboxilated nitrile material.
| SEAL INFORMATION | |
|---|---|
| MATERIAL | 90A URETHANE |
| TEMPERATURE RANGE | -40° to +200° F |
| SPEED | 3 FT/SEC |
| PART NUMBER | (Prefix) - (Size) |
| SEAL INFORMATION | |
|---|---|
| MATERIAL | 90A URETHANE |
| TEMPERATURE RANGE | -40° to +200° F |
| SPEED | 3 FT/SEC |
| PART NUMBER | (Prefix) (Size) |
NOTE: Piston diameter 'I' dimensions are given for pistons without wear rings.
| SEAL INFORMATION | |
|---|---|
| MATERIAL | 15% GLASS FILLED PTFE SEAL RUBBER ENERGIZER |
| TEMPERATURE RANGE | -40° to +220° F |
| PRESSURE RANGE | 0 to 5,000 PSI |
| SPEED | 12 FT/SEC |
| PART NUMBER | (Piston Seal)(Type of Seal) - (Size) |
| SEAL INFORMATION | |
|---|---|
| MATERIAL | URETHANE |
| TEMPERATURE RANGE | -65 ° TO +220°F |
| SPEED | 3 FT/SEC |
| PART NUMBER | (prefix)(size) |
