Molded in urethane and employing a back-up, this seal absorbs the shock of pressure spikes protecting the rod seal. The unique design relieves back pressure between the buffer and the rod seal.
| SEAL INFORMATION | |
|---|---|
| MATERIAL | URETHANE BUFFER NYLON BACK-UP |
| TEMPERATURE RANGE | -30° to +220° F |
| PRESSURE RANGE | 0 to 7,000 PSI |
| SPEED | 3 FT/SEC |
| PART NUMBER | (Prefix) - (ID) x (OD) x (H) |
Molded in PTFE with a rubber energizer, this seal absorbs the shock of pressure spikes protection the rod seal. This style relieves back pressure by way of slots on the pressure side of the energizer
| SEAL INFORMATION | |
|---|---|
| MATERIAL | FILLED PTFE BUFFER 70A NITRILE ENERGIZER |
| TEMPERATURE RANGE | -40° to +220° F |
| PRESSURE RANGE | 0 to 5,000 PSI |
| SPEED | 12FT/SEC |
| PART NUMBER | (Prefix) - (ID) x (OD) x (H) |
Molded in nitrile, this double lipped wiper is found in Toyota lift trucks.
| SEAL INFORMATION | |
|---|---|
| MATERIAL | NITRILE |
| TEMPERATURE RANGE | -49° to +212° F |
| SPEED | 3 FT/SEC |
| PART NUMBER | (Prefix) - (ID) x (OD) X (H) |
Made from filled PTFE, these rings are suitable for light duty bearing service, but are more often installed on the outboard ends of a piston to catch metal particles and protect the seal area.
NOTE: MWRZ-G15 Relief Groove, not split
| SEAL INFORMATION | |||
|---|---|---|---|
| MATERIAL | FILLED PTFE | ||
| TEMPERATURE RANGE | -100° to +550° F | ||
| SPEED | 12 FT/SEC | ||
| COMPRESSIVE STRENGTH | 1,700 PSI | ||
| TENSILE STRENGTH | 2,200 PSI | ||
| PART NUMBER | (Prefix) - (OD) x (W) x (CS) | ||
Fabricated from fine woven fabric and phenolic resins, this wear ring is strong yet light weight with an excellent wear rate.
| SEAL INFORMATION | |||
|---|---|---|---|
| MATERIAL | PHENOLIC | ||
| TEMPERATURE RANGE | -40° to +250° F | ||
| SPEED | 3 FT/SEC | ||
| COMPRESSIVE STRENGTH | 16,000 PSI | ||
| TENSILE STRENGTH | 10,600 PSI | ||
| PART NUMBER | (Prefix) - (OD) x (W) x (CS) | ||
Primarily a British design, this can be installed one or two in a groove. Excellent wear characteristics.
| SEAL INFORMATION | |
|---|---|
| MATERIAL | ACETAL |
| TEMPERATURE RANGE | -40° to +230° F |
| SPEED | 3 FT/SEC |
| PART NUMBER | (Prefix) - (ID) x (OD) X (H) |
This wear ring is molded from glass reinforced nylon. This style is highly recommended because of their wear rate and non-scoring properties and their ability to ingest metal chips.
| SEAL INFORMATION | |||
|---|---|---|---|
| MATERIAL | NYLON | ||
| TEMPERATURE RANGE | -40° to +275° F | ||
| SPEED | 3 FT/SEC | ||
| COMPRESSIVE STRENGTH | 26,000 PSI | ||
| TENSILE STRENGTH | 25,000 PSI | ||
| PART NUMBER | (Prefix) - (OD) x (W) x (CS) | ||
Suffix:
EI = Top adapter has an internal anti-extrusion ring.
DR = Dry-rod application. Pre-loaded male adapter
| SEAL INFORMATION | |
|---|---|
| MATERIAL | FABRIC / RUBBER VEE RINGS FABRIC / RUBBER OR ACETAL ADAPTORS |
| TEMPERATURE RANGE | -35° to +220° F |
| PRESSURE RANGE | 0 to 5,000 PSI |
| SPEED | 1.5 FT/SEC |
| PART NUMBER | (Prefix) - (ID) x (OD) x (H) |
Molded from tough polyurethane material, these seals offer high resistance to wear and abrasion. Energized with a four-lobed ring they have greatly increased low pressure performance.
| SEAL INFORMATION | |
|---|---|
| MATERIAL | URETHANE |
| TEMPERATURE RANGE | -40° to +200° F |
| PRESSURE RANGE | 0 to 5,000 PSI |
| SPEED | 3 FT/SEC |
| SUFFIX | HT = HIGH TEMPERATURE |
| PART NUMBER | (Prefix) - (ID) x (OD) x (H) |
Utilizing tough polyurethane, these seals possess excellent wear and abrasion resistance. Symmetrical in design they can be used in rod or piston applications
E = EUROPEAN URETHANE
| SEAL INFORMATION | |
|---|---|
| MATERIAL | URETHANE |
| TEMPERATURE RANGE | -22° to +212° F |
| PRESSURE RANGE | 0 to 5,000 PSI |
| SPEED | 3 FT/SEC |
| PART NUMBER | (Prefix) - (ID) x (OD) x (H) |
Molded in polyurethane, these rotary pressure seals are specifically designed for use sin hydraulic swivel joints.
| SEAL INFORMATION | |
|---|---|
| MATERIAL | 92A URETHANE |
| TEMPERATURE RANGE | -50° to +220° F |
| PRESSURE RANGE | 0 to 5,000 PSI |
| SPEED | 3 FT/SEC |
| PART NUMBER | (Prefix) - (ID) x (OD) x (H) |
Molded from 90A nitrile, this seal provides high sealability in a symmetrical design suitable for rods or pistons.
| SEAL INFORMATION | |
|---|---|
| MATERIAL | 90A NITRILE |
| TEMPERATURE RANGE | -13° to +212° F |
| PRESSURE RANGE | 0 to 2,000 PSI |
| SPEED | 3 FT/SEC |
| PART NUMBER | (Prefix) - (ID) x (OD) x (H) |
Constructed of a rubber seal lip with a rubberized fabric heel, these seals feature a poly-acetal bearing ring. These seals offer excellent sealing ability and high pressure capability. Commonly are used with our MSR retention rings.
| SEAL INFORMATION | |
|---|---|
| MATERIAL | NITRILE / FABRIC BASE ACETAL BEARING |
| TEMPERATURE RANGE | -22° to +220° F |
| PRESSURE RANGE | 0 to 6,000 PSI |
| SPEED | 1.5 FT/SEC |
| PART NUMBER | (Prefix)-(ID) x (OD) x (H) |
Incorporating a rubber U-cup shape and a rubberized fabric heel, this seal provides excellent sealability and high strength. The 'U' shape design decreases the radial interference for a lower lip friction.
| SEAL INFORMATION | |
|---|---|
| MATERIAL | NITRILE / FABRIC BASE |
| TEMPERATURE RANGE | -22° to +212° F |
| PRESSURE RANGE | 0 to 2,900 PSI |
| SPEED | 1.5 FT/SEC |
| PART NUMBER | (Prefix) - (ID) x (OD) x (H) |
Constructed of a rubber seal lip with a rubberized fabric heel, these seals feature a poly-acetal bearing ring. These seals offer excellent sealing ability and high pressure capability. The solid lip area increases the radial interference for improved low-pressure sealing. Commonly are used with our MSR retention rings.
| SEAL INFORMATION | |
|---|---|
| MATERIAL | NITRILE / FABRIC BASE ACETAL BEARING |
| TEMPERATURE RANGE | -22° to +220° F |
| PRESSURE RANGE | 0 to 6,000 PSI |
| SPEED | 1.5 FT/SEC |
| PART NUMBER | (Prefix)-(ID) x (OD) x (H) |
Incorporating a rubber seal lip and a rubberized fabric heel, this seal provides excellent sealability and high strength.
| SEAL INFORMATION | |
|---|---|
| MATERIAL | NITRILE / FABRIC BASE |
| TEMPERATURE RANGE | -22° to +212° F |
| PRESSURE RANGE | 0 to 2,900 PSI |
| SPEED | 1.5 FT/SEC |
| PART NUMBER | (Prefix) - (ID) x (OD) x (H) |
