This light duty wiper is molded in polyurethane and features a double stepped shoulder to fit tightly in the gland throat.
| SEAL INFORMATION | |
|---|---|
| MATERIAL | URETHANE |
| TEMPERATURE RANGE | -22° to +212° F |
| SPEED | 3 FT/SEC |
| PART NUMBER | (Prefix) - (ID) x (OD) X (H) |
-
-
This wiper features a lip on top of the shoulder which makes contact with the throat of the groove. This serves to prevent contaminants from entering the groove.
SEAL INFORMATION MATERIAL URETHANE TEMPERATURE RANGE -30° to +220° F PART NUMBER (Prefix) - (ID) x (OD) X (H) -
This medium duty wiper is molded in nitrile rubber.
SEAL INFORMATION MATERIAL NITRILE TEMPERATURE RANGE -22° to +212° F SPEED 3 FT/SEC PART NUMBER (Prefix) - (ID) x (OD) X (H) -
Molded in urethane, this wiper features a double lip which prevents fluid that seeps by the rod seal from exiting the cylinder.
SEAL INFORMATION MATERIAL URETHANE TEMPERATURE RANGE -30° to +200° F SPEED 3 FT/SEC PART NUMBER (Prefix) - (ID) x (OD) X (H) -
Molded in urethane, this wiper is flexible enough to easily snap into a groove yet tough enough to handle difficult rod wiping applications.
SEAL INFORMATION MATERIAL URETHANE TEMPERATURE RANGE -30° to +200° F SPEED 3 FT/SEC PART NUMBER (Prefix) - (ID) x (OD) X (H) -
A double acting piston seal with many features; two compact seal edges to concentrate the load against the dynamic surface, a cavity between the two external seal edges to retain fluid (reducing friction and wear), side grooves to allow pressure to load the energizer in all working conditions, high sealing performance at low pressure, excellent wear-resistance, and high resistance against extrusion.
SEAL INFORMATION MATERIAL 97A URETHANE SEAL
70A NITRILE EXPANDERTEMPERATURE RANGE -22° TO +210° F PRESSURE RANGE 0 TO 5,800 PSI SPEED 1.5 FT/SEC PART NUMBER (Prefix) - (OD) x (ID) x (W) MAXIMUM EXTRUSION GAP Pressure (PSI) 725 1450 2900 4350 5800 Max Diametrical Gap (inches) 0.047 0.031 0.016 0.010 0.007 -
Molded from tough, wear resistant polyester with additives of 5% glass fiber and 5% PTFE these seals are totally interchangeable with style MPS seals of the same dimensions. Nitrile o-rings are used as energizers.
SEAL INFORMATION MATERIAL GLASS / PTFE FILLED POLYESTER SEAL, RUBBER ENERGIZER TEMPERATURE RANGE -40° to +230° F PRESSURE RANGE 0 to 5,000 PSI PART NUMBER (Prefix) - (ID) x (W) x (CS1) -
Molded from filled PTFE and machined to close tolerances these seals feature low friction and excellent wear characteristics. Nitrile o-rings are used for energizers.
SEAL INFORMATION MATERIAL PTFE PISTON SEAL
70A NITRILE ENERGIZERTEMPERATURE RANGE -40° TO +230° F PRESSURE RANGE 0 TO 5,000 PSI SPEED 12 FT/SEC PART NUMBER (Prefix) - (ID) x (W) x (CS1) -
This is a single acting rod seal designed for low and high pressure sealing and is commonly found in telescopic cylinders. The seal consists of a molded rubber sealing lip, rubberized fabric hell. and a polyester header, for improved extrusion resistance.
SEAL INFORMATION MATERIAL RUBBER, FABRIC, POLYESTER ELASTOMER TEMPERATURE RANGE -22° to +212° F PRESSURE RANGE 0 to 5800 PSI SPEED 1.5 FT/SEC PART NUMBER (Prefix) - (ID) x (OD) x (Height) -
Molded in urethane and employing a back-up, this seal absorbs the shock of pressure spikes protecting the rod seal. The unique design relieves back pressure between the buffer and the rod seal.
SEAL INFORMATION MATERIAL URETHANE BUFFER
NYLON BACK-UPTEMPERATURE RANGE -30° to +220° F PRESSURE RANGE 0 to 7,000 PSI SPEED 3 FT/SEC PART NUMBER (Prefix) - (ID) x (OD) x (H) -
Molded in nitrile, this double lipped wiper is found in Toyota lift trucks.
SEAL INFORMATION MATERIAL NITRILE TEMPERATURE RANGE -49° to +212° F SPEED 3 FT/SEC PART NUMBER (Prefix) - (ID) x (OD) X (H) -
Molded in PTFE with a rubber energizer, this seal absorbs the shock of pressure spikes protection the rod seal. This style relieves back pressure by way of slots on the pressure side of the energizer
SEAL INFORMATION MATERIAL FILLED PTFE BUFFER
70A NITRILE ENERGIZERTEMPERATURE RANGE -40° to +220° F PRESSURE RANGE 0 to 5,000 PSI SPEED 12FT/SEC PART NUMBER (Prefix) - (ID) x (OD) x (H) -
Made from filled PTFE, these rings are suitable for light duty bearing service, but are more often installed on the outboard ends of a piston to catch metal particles and protect the seal area.
NOTE: MWRZ-G15 Relief Groove, not splitSEAL INFORMATION MATERIAL FILLED PTFE TEMPERATURE RANGE -100° to +550° F SPEED 12 FT/SEC COMPRESSIVE STRENGTH 1,700 PSI TENSILE STRENGTH 2,200 PSI PART NUMBER (Prefix) - (OD) x (W) x (CS) -
Fabricated from fine woven fabric and phenolic resins, this wear ring is strong yet light weight with an excellent wear rate.
SEAL INFORMATION MATERIAL PHENOLIC TEMPERATURE RANGE -40° to +250° F SPEED 3 FT/SEC COMPRESSIVE STRENGTH 16,000 PSI TENSILE STRENGTH 10,600 PSI PART NUMBER (Prefix) - (OD) x (W) x (CS) -
Primarily a British design, this can be installed one or two in a groove. Excellent wear characteristics.
SEAL INFORMATION MATERIAL ACETAL TEMPERATURE RANGE -40° to +230° F SPEED 3 FT/SEC PART NUMBER (Prefix) - (ID) x (OD) X (H) -
This wear ring is molded from glass reinforced nylon. This style is highly recommended because of their wear rate and non-scoring properties and their ability to ingest metal chips.
SEAL INFORMATION MATERIAL NYLON TEMPERATURE RANGE -40° to +275° F SPEED 3 FT/SEC COMPRESSIVE STRENGTH 26,000 PSI TENSILE STRENGTH 25,000 PSI PART NUMBER (Prefix) - (OD) x (W) x (CS)