Molded in PTFE with a rubber energizer, this seal absorbs the shock of pressure spikes protecting the rod seal.
| SEAL INFORMATION | |
|---|---|
| MATERIAL | FILLED PTFE BUFFER 70A NITRILE ENERGIZER |
| TEMPERATURE RANGE | -40° to +220° F |
| PRESSURE RANGE | 0 to 5,000 PSI |
| SPEED | 12 FT/SEC |
| PART NUMBER | (Prefix) - (ID) x (OD) x (H) |
Molded in PTFE with a rubber energizer and a nylon anti-extrusion ring, this seal absorbs the shock of pressure spikes protecting the rod seal.
| SEAL INFORMATION | |
|---|---|
| MATERIAL | PTFE BUFFER 70A NBR ENERGIZER NYLON BACK-UP |
| TEMPERATURE RANGE | -40° to +220° F |
| PRESSURE RANGE | 0 to 5,000 PSI |
| SPEED | 3 FT/SEC |
| PART NUMBER | (Prefix) - (ID) x (OD) x (H) |
For two piece pistons, this seal incorporates a nitrile / fabric seal with two split bearings.
| SEAL INFORMATION | |||
|---|---|---|---|
| MATERIAL | NITRILE SEAL ACETAL BEARING |
||
| TEMPERATURE RANGE | -22° to +190° F | ||
| PRESSURE RANGE | 0 to 5,000 PSI | ||
| SPEED | 1.5 FT/SEC | ||
Please specify 75 or 90 Durometer when ordering. Metric o-rings are offered in minimum package quantities (MP in chart).
| SEAL INFORMATION - 70 DURO MOR-JIS STYLE | |
|---|---|
| MATERIAL | 70A DURO NITRILE |
| TEMPERATURE RANGE | -40° to +220° F |
| PART NUMBER | (Prefix) - (ID) x (CS) |
| SEAL INFORMATION - 70 DURO NITRILE | |
|---|---|
| MATERIAL | 70A DURO NITRILE |
| TEMPERATURE RANGE | -40° to +220° F |
| PART NUMBER | (Prefix) - (ID) x (CS) |
| SEAL INFORMATION - 75 DURO FLUOROCARBON | |
|---|---|
| MATERIAL | 75A DURO FLUOROCARBON |
| TEMPERATURE RANGE | -20° to +400° F |
| PART NUMBER | (Prefix) - (ID) x (CS) |
| SEAL INFORMATION - 90 DURO NITRILE | |
|---|---|
| MATERIAL | 90A DURO NITRILE |
| TEMPERATURE RANGE | -40° to +220° F |
| PART NUMBER | (Prefix) - (ID) x (CS) |
| SEAL INFORMATION | |||
|---|---|---|---|
| MATERIAL | RUBBER SEAL STEEL CASE |
||
| TEMPERATURE RANGE | -40° TO +225° F | ||
| PRESSURE RANGE | 10 PSI @ 1000 FPM | ||
| PART NUMBER | (Prefix) - (ID) X (OD) X (H) | ||
Molded from filled PTFE and machined to close tolerances these seals feature low friction and excellent wear characteristics. Nitrile o-rings are used for energizers.
| SEAL INFORMATION | |
|---|---|
| MATERIAL | PTFE PISTON SEAL 70A NITRILE ENERGIZER |
| TEMPERATURE RANGE | -40° TO +230° F |
| PRESSURE RANGE | 0 TO 5,000 PSI |
| SPEED | 12 FT/SEC |
| PART NUMBER | (Prefix) - (ID) x (W) x (CS1) |
Molded from filled PTFE and machined to close tolerances these seals feature low friction and excellent wear characteristics. Nitrile o-rings are used for energizers.
| SEAL INFORMATION | |
|---|---|
| MATERIAL | PTFE PISTON SEAL 70A NITRILE ENERGIZER |
| TEMPERATURE RANGE | -40° TO +230° F |
| PRESSURE RANGE | 0 TO 5,000 PSI |
| SPEED | 12 FT/SEC |
| PART NUMBER | (Prefix) - (ID) x (W) x (CS1) |
The MPS2000 double action piston seal is designed for heavy duty hydraulic applications. The small profile is resistant to shock loads and has high abrasion and extrusion resistance. Its split design allows simple installation on a solid piston.
| SEAL INFORMATION | |||
|---|---|---|---|
| MATERIAL | NYLON SEAL WITH NITRILE ENERGIZER | ||
| TEMPERATURE RANGE | -22° TO +230° F | ||
| PRESSURE RANGE | 0 TO 7250 PSI | ||
| SPEED | 3 FT/SEC | ||
| PART NUMBER | (Prefix) - (Bore Size) | ||
Designed to fit on one or two piece piston, this piston seal employs a nitrile seal for high sealability, nylon split back-ups for extrusion resistance, and two split bearing rings. No further support bearings required.
| SEAL INFORMATION | |||
|---|---|---|---|
| MATERIAL | 70A NBR SEAL NYLON BACK-UP & BEARING |
||
| TEMPERATURE RANGE | -22° TO +212° F | ||
| PRESSURE RANGE | 0 TO 6,000 PSI | ||
| SPEED | 1.5 FT/SEC | ||
With nitrile seal bonded on each side by fabric material it also incorporates 2 full depth 'L' bearings to form a very strong assembly. This seal requires a two piece piston.
| SEAL INFORMATION | |||
|---|---|---|---|
| MATERIAL | 70A NBR / FABRIC SEAL ACETAL BEARING / BACK-UP |
||
| TEMPERATURE RANGE | -22° TO +212° F | ||
| PRESSURE RANGE | 0 TO 5,000 PSI | ||
| SPEED | 1.5 FT/SEC | ||
This style is designed for two piece pistons. The seal is a molded Nitrile rubber element with bonded rubberized fabric reinforcements and two anti-extrusion polyacetal bearings.
| SEAL INFORMATION | |||
|---|---|---|---|
| MATERIAL | 70A NBR / FABRIC SEAL ACETAL BEARING / BACK-UP |
||
| TEMPERATURE RANGE | -22° to +212° F | ||
| PRESSURE RANGE | 0 to 5,000 PSI | ||
| SPEED | 1.5 FT/SECtd> | ||
Consisting of a nitrile seal and two split acetal bearing, this assembly is used in light duty applications and can be installed on one or two piece pistons.
| SEAL INFORMATION | |||
|---|---|---|---|
| MATERIAL | NITRILE SEAL ACETAL BEARING |
||
| TEMPERATURE RANGE | -22° to +212° F | ||
| PRESSURE RANGE | 0 to 3,000 PSI | ||
| SPEED | 1.5 FT/SEC | ||
Incorporating a nitrile / fabric seal with two split bearing this assembly affords low friction and high strength for one or two piece pistons.
| SEAL INFORMATION | |||
|---|---|---|---|
| MATERIAL | 70A NBR / FABRIC SEAL OD 70A NBR SEAL ID ACETAL BEARING |
||
| TEMPERATURE RANGE | -22° TO +212° F | ||
| PRESSURE RANGE | 0 TO 5,000 PSI | ||
Molded from tough, wear resistant polyester with additives of 5% glass fiber and 5% PTFE these seals are totally interchangeable with style MPS seals of the same dimensions. Nitrile o-rings are used as energizers.
| SEAL INFORMATION | |
|---|---|
| MATERIAL | GLASS / PTFE FILLED POLYESTER SEAL, RUBBER ENERGIZER |
| TEMPERATURE RANGE | -40° to +230° F |
| PRESSURE RANGE | 0 to 5,000 PSI |
| PART NUMBER | (Prefix) - (ID) x (W) x (CS1) |
Molded from tough, wear resistant polyester with additives of 5% glass fiber and 5% PTFE these seals are totally interchangeable with style MPS seals of the same dimensions. Nitrile o-rings are used as energizers.
| SEAL INFORMATION | |
|---|---|
| MATERIAL | GLASS / PTFE FILLED POLYESTER SEAL, RUBBER ENERGIZER |
| TEMPERATURE RANGE | -40° to +230° F |
| PRESSURE RANGE | 0 to 5,000 PSI |
| PART NUMBER | (Prefix) - (ID) x (W) x (CS1) |
Molded from high quality urethane and designed specifically for piston applications. A = Alternative to NOK
| SEAL INFORMATION | |
|---|---|
| MATERIAL | URETHANE |
| TEMPERATURE RANGE | -22° to +212° F |
| PRESSURE RANGE | 0 to 5,000 PSI |
| SPEED | 3 FT/SEC |
| PART NUMBER | (Prefix)-(ID) x (OD) x (H) |
