Style RU9 seals are molded from MDI based Zurcon® Z25 urethane. This seal offers good elasticity with low compression set while maintaining a high level of tribological characteristics. The dynamic seal lip incorporates slide segments that will increase back-pumping capabilities while reducing friction. The RU9 style rod seal is ideal for hydraulic applications where high temperature and high pressure performance is required.

SEAL INFORMATION
MATERIAL	95A URETHANE
TEMPERATURE RANGE	-31° to +270° F
PRESSURE RANGE	0 to 5,800 PSI
SPEED	1.65 FT/SEC
PART NUMBER	(Prefix)(CS) - (ID) - (Height)

MAXIMUM EXTRUSION GAP
PRESSURE	1000 PSI	3000 PSI	5000 PSI	6000 PSI
MAX DIAM. GAP	0.032"	0.015"	0.012"	0.009"

Style DRTU-BHT rod seals are molded in Freudenberg® AU 30000 urethane. These seals are specifically designed with a second lip on their inside diameter and engineered to attain maximum life and reliability in dynamic rod sealing. This feature results in reduced leakage, less friction, increased stability, and prevents air and contaminants from entering the cylinder. This high tear-resistant urethane demonstrates stability throughout a wide range of temperatures. In addition, this material is well suited to mineral and biodegradable hydraulic fluids as well as being resistant to hydrolysis.

SEAL INFORMATION
MATERIAL	94A URETHANE
TEMPERATURE RANGE	-31° to +250° F
PRESSURE RANGE	0 to 7,250 PSI
SPEED	1.5 FT/SEC
PART NUMBER	(Prefix)(CS) - (ID) - (Height)

MAXIMUM EXTRUSION GAP
PRESSURE	1000 PSI	3000 PSI	5000 PSI	6000 PSI
MAX DIAM. GAP	0.032"	0.015"	0.012"	0.009"