Molded in urethane, this wiper features a lip on the outer diameter to aid in contaminant exclusion.
| SEAL INFORMATION | |
|---|---|
| MATERIAL | URETHANE |
| TEMPERATURE RANGE | -30° to +200° F |
| SPEED | 3 FT/SEC |
| PART NUMBER | (Prefix) - (ID) x (OD) X (H) |
-
-
Molded in urethane, this wiper is flexible enough to easily snap into a groove yet tough enough to handle difficult rod wiping applications.
SEAL INFORMATION MATERIAL URETHANE TEMPERATURE RANGE -30° to +200° F SPEED 3 FT/SEC PART NUMBER (Prefix) - (ID) x (OD) X (H) -
Molded in urethane, this wiper features a double lip which prevents fluid that seeps by the rod seal from exiting the cylinder.
SEAL INFORMATION MATERIAL URETHANE TEMPERATURE RANGE -30° to +200° F SPEED 3 FT/SEC PART NUMBER (Prefix) - (ID) x (OD) X (H) -
This medium duty wiper is molded in nitrile rubber.
SEAL INFORMATION MATERIAL NITRILE TEMPERATURE RANGE -22° to +212° F SPEED 3 FT/SEC PART NUMBER (Prefix) - (ID) x (OD) X (H) -
This wiper features a lip on top of the shoulder which makes contact with the throat of the groove. This serves to prevent contaminants from entering the groove.
SEAL INFORMATION MATERIAL URETHANE TEMPERATURE RANGE -30° to +220° F PART NUMBER (Prefix) - (ID) x (OD) X (H) -
This light duty wiper is molded in polyurethane and features a double stepped shoulder to fit tightly in the gland throat.
SEAL INFORMATION MATERIAL URETHANE TEMPERATURE RANGE -22° to +212° F SPEED 3 FT/SEC PART NUMBER (Prefix) - (ID) x (OD) X (H) -
Molded in nitrile, this double lipped wiper is found in Toyota lift trucks.
SEAL INFORMATION MATERIAL NITRILE TEMPERATURE RANGE -49° to +212° F SPEED 3 FT/SEC PART NUMBER (Prefix) - (ID) x (OD) X (H) -
A wide range of ST wipers are now offered in the slotted heel design. The slots in the heel allow excess hydraulic fluid to bypass the wiper, preventing wiper blowout.
SEAL INFORMATION MATERIAL 90A URETHANE TEMPERATURE RANGE URETHANE: -40° to +200° F SPEED 3 FT/SEC PART NUMBER (Prefix) - (Size) - (Slotted Heel) -
Style ST-XL wipers are molded from premium urethane and are direct replacements for Style 'ST' or 'D' wipers. The outside diameter of the ring has a crush lip providing extra interference in the groove. A bead on the shoulder stops contaminants from entering through the groove. The inside diameter is ribbed to prevent pressure traps between the wiper and rod seal.
SEAL INFORMATION MATERIAL 94A URETHANE TEMPERATURE RANGE -40° to +230° F SPEED 3 FT/SEC PART NUMBER (Prefix) - (Size) - (Extra Lip) -
STXE wipers are designed to retrofit the standard ST wiper groove while providing superior performance. The o-ring energizer limits dirt intrusion around the O.D. of the wiper. The energizer also makes this wiper more effective in applications with severe side deflections.
SEAL INFORMATION MATERIAL URETHANE WIPER
RUBBER ENERGIZERTEMPERATURE RANGE -40° to +220° F SPEED 3 FT/SEC PART NUMBER (Prefix) - (Size) -
SEAL INFORMATION MATERIAL BUNA-N TEMPERATURE RANGE -22° to +212° F SPEED 3 FT/SEC PART NUMBER (Prefix) (Size)