Molded in urethane with a steel case, this seal is double cased and used to exclude contaminants from cylinder link pins.
| SEAL INFORMATION | |
|---|---|
| MATERIAL | URETHANE LIP STEEL CASE STEEL CASE |
| TEMPERATURE RANGE | -30° to +200° F |
| SPEED | 3 FT/SEC |
-
-
With a steel body, bronze liner and PTFE / lead overlay, these bushings possess excellent wearability and tremendous compressive strength.
SEAL INFORMATION MATERIAL BRONZE LINING
PTFE/LEAD OVERLAY
STEEL BACKINGTEMPERATURE RANGE -325° to +536° F SPEED 12 FT/SEC COMPRESSIVE STRENGTH 44,000 PSI PART NUMBER (Prefix) - (ID) x (OD) X (H) -
Manufactured to a large variety of widths and thicknesses, this material affords low friction capabilities but with low compressive strength. The material also has the capability of ingesting metal particles and keeping them from the seal area.
NOTE: List Price = 1 Foot (12")SEAL INFORMATION MATERIAL 60% BRONZE FILLED PTFE TEMPERATURE RANGE -50° to +390° F SPEED 12 FT/SEC COMPRESSIVE STRENGTH 1,700 PSI PART NUMBER (Prefix) - (W) x (TH) -
Fabricated from woven fabric and polyester resins, this material can be cut to length to fit rod or piston grooves.
NOTE: List Price = 1 Foot (12")
TQ16 - Sold in rolls of 16 foot sectionsSEAL INFORMATION MATERIAL FABRICATED REINFORCED POLYESTER TEMPERATURE RANGE -30° to +265° F SPEED 3 FT/SEC COMPRESSIVE STRENGTH 24,000 PSI PART NUMBER (Prefix) - (W) x (TH) -
The MHMU style multi-lip rod u-seal combines the pressure-compensating, uni-directional characteristics of a u-seal with the multi-lip sealing effectiveness of compression-type stacked-packings. Made from premium materials, the MHMU utilizes several sealing lip edges for dry rod performance while minimizing friction. The multi-lip design maintains a critical sealing edge even though increasing pressure moves the line of contact down towards the heel.
SEAL INFORMATION MATERIAL URETHANE TEMPERATURE RANGE -50° to +230° F PRESSURE RANGE 0 to 5,000 PSI SPEED 3 FT/SEC PART NUMBER (Prefix) - (ID) x (OD) x (H) -
Molded from 70A nitrile for high sealability they employ a hard nylon anti-extrusion ring as a companion piece.
SEAL INFORMATION MATERIAL 70A NITRILE
NYLON BACK-UPTEMPERATURE RANGE -20° to +220° F PRESSURE RANGE 0 to 3,000 PSI SPEED 3 FT/SEC PART NUMBER (PREFIX) - (OD) -
Molded from 70A nitrile for high sealability they employ a hard nylon anti-extrusion ring as a companion piece.
SEAL INFORMATION MATERIAL 70A NITRILE
ACETAL BACK-UPTEMPERATURE RANGE -20° to +220° F PRESSURE RANGE 0 to 4,000 PSI SPEED 3 FT/SEC PART NUMBER (PREFIX) - (OD) -
Molded from 70A nitrile for high sealability they employ a hard nylon anti-extrusion ring as a companion piece.
SEAL INFORMATION MATERIAL 70A NITRILE
ACETAL BACK-UPTEMPERATURE RANGE -20° to +220° F PRESSURE RANGE 0 to 4,000 PSI SPEED 3 FT/SEC PART NUMBER (PREFIX) - (OD) -
Molded from urethane for resistance to extrusion and abrasion, they employ a hard nylon anti-extrusion ring.
SEAL INFORMATION MATERIAL URETHANE SEAL
NYLON BACK-UPTEMPERATURE RANGE -40° to +200° F SPEED 3 FT/SEC PRESSURE RANGE 0 to 3,000 PSI -
Molded in polyurethane this buffer is a simple flat, washer-like profile
SEAL INFORMATION MATERIAL URETHANE TEMPERATURE RANGE -40° to +200° F PRESSURE RANGE 0 to 5,000 PSI SPEED 3 FT/SEC PART NUMBER (Prefix) - (ID) x (OD) x (H) -
A double acting piston seal with many features; two compact seal edges to concentrate the load against the dynamic surface, a cavity between the two external seal edges to retain fluid (reducing friction and wear), side grooves to allow pressure to load the energizer in all working conditions, high sealing performance at low pressure, excellent wear-resistance, and high resistance against extrusion.
SEAL INFORMATION MATERIAL 97A URETHANE SEAL
70A NITRILE EXPANDERTEMPERATURE RANGE -22° TO +210° F PRESSURE RANGE 0 TO 5,800 PSI SPEED 1.5 FT/SEC PART NUMBER (Prefix) - (OD) x (ID) x (W) MAXIMUM EXTRUSION GAP Pressure (PSI) 725 1450 2900 4350 5800 Max Diametrical Gap (inches) 0.047 0.031 0.016 0.010 0.007 -
Molded in PTFE with a rubber energizer, this seal absorbs the shock of pressure spikes protecting the rod seal.
SEAL INFORMATION MATERIAL FILLED PTFE BUFFER
70A NITRILE
ENERGIZERTEMPERATURE RANGE -40° to +220° F PRESSURE RANGE 0 to 5,000 PSI SPEED 12 FT/SEC PART NUMBER (Prefix) - (ID) x (OD) x (H) -
Molded in PTFE with a rubber energizer and a nylon anti-extrusion ring, this seal absorbs the shock of pressure spikes protecting the rod seal.
SEAL INFORMATION MATERIAL PTFE BUFFER
70A NBR ENERGIZER
NYLON BACK-UPTEMPERATURE RANGE -40° to +220° F PRESSURE RANGE 0 to 5,000 PSI SPEED 3 FT/SEC PART NUMBER (Prefix) - (ID) x (OD) x (H) -
For two piece pistons, this seal incorporates a nitrile / fabric seal with two split bearings.
SEAL INFORMATION MATERIAL NITRILE SEAL
ACETAL BEARINGTEMPERATURE RANGE -22° to +190° F PRESSURE RANGE 0 to 5,000 PSI SPEED 1.5 FT/SEC -
Please specify 75 or 90 Durometer when ordering. Metric o-rings are offered in minimum package quantities (MP in chart).
SEAL INFORMATION - 70 DURO MOR-JIS STYLE MATERIAL 70A DURO NITRILE TEMPERATURE RANGE -40° to +220° F PART NUMBER (Prefix) - (ID) x (CS) SEAL INFORMATION - 70 DURO NITRILE MATERIAL 70A DURO NITRILE TEMPERATURE RANGE -40° to +220° F PART NUMBER (Prefix) - (ID) x (CS) SEAL INFORMATION - 75 DURO FLUOROCARBON MATERIAL 75A DURO FLUOROCARBON TEMPERATURE RANGE -20° to +400° F PART NUMBER (Prefix) - (ID) x (CS) SEAL INFORMATION - 90 DURO NITRILE MATERIAL 90A DURO NITRILE TEMPERATURE RANGE -40° to +220° F PART NUMBER (Prefix) - (ID) x (CS) -
SEAL INFORMATION MATERIAL RUBBER SEAL
STEEL CASETEMPERATURE RANGE -40° TO +225° F PRESSURE RANGE 10 PSI @ 1000 FPM PART NUMBER (Prefix) - (ID) X (OD) X (H)