These seals are specifically designed to seal on their inside diameter and engineered to attain maximum life and reliability in dynamic rod sealing. They employ a hard plastic I.D. back-up ring to reduce the possibility of extrusion.
| SEAL INFORMATION | |
|---|---|
| MATERIAL | 92A URETHANE |
| TEMPERATURE RANGE | -40° to +230° F |
| PRESSURE RANGE | 0 to 6,000 PSI |
| SPEED | 3 FT/SEC |
| PART NUMBER | (Prefix)(CS) - (ID) - (Height) |
U-Seal Retainer Ring
These rings are split for ease of installation and are retained in a groove. Their use is primarily to retain a single acting piston seals. Commonly used with UFN style piston seals.
| SEAL INFORMATION | |
|---|---|
| MATERIAL | ACETAL |
| TEMPERATURE RANGE | -22 ° TO +212°F |
SFS SPLIT FLANGE SEALS
FOR 4-BOLT SPLIT FLANGE CONNECTORS
Flange seals are a one piece dual durometer urethane static seal. The black outer part is a tough, extrusion resistant 95 Durometer and the yellow inner layer is 57 Durometer that has low compression set and excellent sealing properties. These seals are a direct replacement for o-rings and do not require modification to any split flange groove.
| SEAL INFORMATION | |
|---|---|
| MATERIAL | URETHANE |
| TEMPERATURE RANGE | -40° TO +200°F |
| PRESSURE RANGE | 0 TO 3000 PSI |
| SPEED | STATIC |
| PART NUMBER | (Prefix) - (Dash No.) |
| SEAL INFORMATION | |
|---|---|
| MATERIAL | BUNA-N RUBBER |
| TEMPERATURE RANGE | -40° TO +240°F |
| PRESSURE RANGE | VARIES ACCORDING TO DIAMETRAL CLEARANCE |
| PART NUMBER | (prefix) (Cord) - (Nom. Size) (Fluorocarbon) |
| SEAL INFORMATION | |
|---|---|
| MATERIAL | BLACK FLUOROCARBON |
| TEMPERATURE RANGE | -20° TO +400°F |
| PRESSURE RANGE | VARIES ACCORDING TO DIAMETRAL CLEARANCE |
| PART NUMBER | (Prefix) (Cord) - (Nom. Size.) (Fluorocarbon) |
| SEAL INFORMATION | |
|---|---|
| MATERIAL | 90 DUROMETER, BUNA-N RUBBER |
| TEMPERATURE RANGE | -40° TO +240°F |
| PRESSURE RANGE | VARIES ACCORDING TO DIAMETRAL CLEARANCE |
| PART NUMBER | (prefix) (Dash No.) (90 Duro Fluorocarbon) |
| SEAL INFORMATION | |
|---|---|
| MATERIAL | FLUOROCARBON |
| TEMPERATURE RANGE | -20° TO +400° F |
| PRESSURE RANGE | VARIES ACCORDING TO DIAMETRAL CLEARANCE |
| PART NUMBER | (Prefix) - (Dash No.) - (90 Duro Fluorocarbon) |
| SEAL INFORMATION | |
|---|---|
| MATERIAL | BUNA-N |
| TEMPERATURE RANGE | -22° to +212° F |
| SPEED | 3 FT/SEC |
| PART NUMBER | (Prefix) (Size) |
| SEAL INFORMATION | |
|---|---|
| MATERIAL | BUNA-N |
| TEMPERATURE RANGE | -22° to +212° F |
| SPEED | 3 FT/SEC |
| PART NUMBER | (Prefix) (Size) |
| SEAL INFORMATION | |
|---|---|
| MATERIAL | BUNA-N |
| TEMPERATURE RANGE | -22° to +212° F |
| SPEED | 3 FT/SEC |
| PART NUMBER | (Prefix) (Size) |
STXE wipers are designed to retrofit the standard ST wiper groove while providing superior performance. The o-ring energizer limits dirt intrusion around the O.D. of the wiper. The energizer also makes this wiper more effective in applications with severe side deflections.
| SEAL INFORMATION | |
|---|---|
| MATERIAL | URETHANE WIPER RUBBER ENERGIZER |
| TEMPERATURE RANGE | -40° to +220° F |
| SPEED | 3 FT/SEC |
| PART NUMBER | (Prefix) - (Size) |
Style ST-E is a light to medium duty urethane wiper ring with a square shoulder, similar to our standard ST style wipers but with different dimensions.
| SEAL INFORMATION | |
|---|---|
| MATERIAL | URETHANE |
| TEMPERATURE RANGE | -31° to +212° F |
| SPEED | 3 FT/SEC |
| PART NUMBER | (Prefix) - (Size) |
| SEAL INFORMATION | |
|---|---|
| MATERIAL | NYLON |
| TEMPERATURE RANGE | -40° to +212° F |
| SPEED | 3 FT/SEC |
| PART NUMBER | (Prefix) - (Size) |
| SEAL INFORMATION | |
|---|---|
| MATERIAL | URETHANE |
| TEMPERATURE RANGE | -65 ° TO +220°F |
| SPEED | 3 FT/SEC |
| PART NUMBER | (prefix)(size) |
