- Page 13 of 14 - Seal & Cylinder Source, Inc.

ST WIPER RINGS

$2.74 – $107.47

Style ST wiper rings are precision molded from 90A durometer urethane. Flexible enough to easily snap into a groove yet tough enough to handle difficult rod wiping applications. 'V' tagged wipers are constructed of fluorocarbon.

Product Codes ending in SH are designed with a Slotted Heel. The slots in the heel allow excess hydraulic fluid to bypass the wiper, preventing wiper blowout.

SEAL INFORMATION
MATERIAL	URETHANE / FLUOROCARBON
TEMPERATURE RANGE	URETHANE: -40° to +200° F FLUOROCARBON: -20° to +400° F
SPEED	3 FT/SEC
PART NUMBER	(Prefix) - (Size) - (Alternative Mat.)

Select options Details

ST-E WIPER RINGS

$16.77 – $110.54

Style ST-E is a light to medium duty urethane wiper ring with a square shoulder, similar to our standard ST style wipers but with different dimensions.

SEAL INFORMATION

MATERIAL URETHANE

TEMPERATURE RANGE -31° to +212° F

SPEED 3 FT/SEC

PART NUMBER (Prefix) - (Size)

Select options This product has multiple variants. The options may be chosen on the product page Details

SEAL INFORMATION
MATERIAL	URETHANE
TEMPERATURE RANGE	-31° to +212° F
SPEED	3 FT/SEC
PART NUMBER	(Prefix) - (Size)

ST-SH WIPER RINGS

$2.66 – $32.68

A wide range of ST wipers are now offered in the slotted heel design. The slots in the heel allow excess hydraulic fluid to bypass the wiper, preventing wiper blowout.

SEAL INFORMATION
MATERIAL	90A URETHANE
TEMPERATURE RANGE	URETHANE: -40° to +200&deg F
SPEED	3 FT/SEC
PART NUMBER	(Prefix) - (Size) - (Slotted Heel)

Select options Details

ST-XL WIPER RINGS

$3.32 – $28.20

Style ST-XL wipers are molded from premium urethane and are direct replacements for Style 'ST' or 'D' wipers. The outside diameter of the ring has a crush lip providing extra interference in the groove. A bead on the shoulder stops contaminants from entering through the groove. The inside diameter is ribbed to prevent pressure traps between the wiper and rod seal.

SEAL INFORMATION

MATERIAL 94A URETHANE

TEMPERATURE RANGE -40° to +230° F

SPEED 3 FT/SEC

PART NUMBER (Prefix) - (Size) - (Extra Lip)

Select options This product has multiple variants. The options may be chosen on the product page Details

SEAL INFORMATION
MATERIAL	94A URETHANE
TEMPERATURE RANGE	-40° to +230° F
SPEED	3 FT/SEC
PART NUMBER	(Prefix) - (Size) - (Extra Lip)

STXE WIPER RINGS

$14.54 – $54.98

STXE wipers are designed to retrofit the standard ST wiper groove while providing superior performance. The o-ring energizer limits dirt intrusion around the O.D. of the wiper. The energizer also makes this wiper more effective in applications with severe side deflections.

SEAL INFORMATION
MATERIAL	URETHANE WIPER RUBBER ENERGIZER
TEMPERATURE RANGE	-40° to +220° F
SPEED	3 FT/SEC
PART NUMBER	(Prefix) - (Size)

Select options Details

SWNB WIPER RINGS

$3.60 – $8.23

SEAL INFORMATION

MATERIAL BUNA-N

TEMPERATURE RANGE -22° to +212° F

SPEED 3 FT/SEC

PART NUMBER (Prefix) (Size)

Select options This product has multiple variants. The options may be chosen on the product page Details
SWNC WIPER RINGS

$3.86 – $22.76

SEAL INFORMATION

MATERIAL BUNA-N

TEMPERATURE RANGE -22° to +212° F

SPEED 3 FT/SEC

PART NUMBER (Prefix) (Size)

Select options This product has multiple variants. The options may be chosen on the product page Details
SWSN WIPER RINGS

$3.69 – $14.33

SEAL INFORMATION

MATERIAL BUNA-N

TEMPERATURE RANGE -22° to +212° F

SPEED 3 FT/SEC

PART NUMBER (Prefix) (Size)

Select options This product has multiple variants. The options may be chosen on the product page Details

SEAL INFORMATION
MATERIAL	BUNA-N
TEMPERATURE RANGE	-22° to +212° F
SPEED	3 FT/SEC
PART NUMBER	(Prefix) (Size)

SEAL INFORMATION
MATERIAL	BUNA-N
TEMPERATURE RANGE	-22° to +212° F
SPEED	3 FT/SEC
PART NUMBER	(Prefix) (Size)

SEAL INFORMATION
MATERIAL	BUNA-N
TEMPERATURE RANGE	-22° to +212° F
SPEED	3 FT/SEC
PART NUMBER	(Prefix) (Size)

TP PISTON T-SEALS

$7.00 – $158.59

T-Seals are non-spiraling and extrusion resistant to 5,000 psi with improved tolerances.
IB = Intermediate Base, WB = Wide Base

Intermediate and Wide Base T-Seals are designed to fit MIL-5514F o-ring glands only and interchange with 1 o-ring / 1 back-up ring and 1 o-ring / 2 back-up ring grooves, respectively.

SEAL INFORMATION
MATERIAL	BUNA-N RUBBER SEAL - HARD PLASTIC BACK-UPS
TEMPERATURE RANGE	-35° to +220° F
PRESSURE RANGE	0 to 5,000 PSI
SPEED	3 FT/SEC
PART NUMBER	(Prefix) - (Size)

Select options Details

TP-L PISTON T-SEALS

$9.09 – $52.79

The Style TP-L seal is a zero drift piston seal for bi-directional pressure applications. The locking anti-extrusion rings provide for an easier installation. It is designed to retrofit O-Ring and standard T-seal grooves. The 70 shore A NBR is designed specifically for performance in compression type dynamic seals. Other features include a net molded dynamic sealing surface and backup chamfers.

SEAL INFORMATION
MATERIAL	BUNA-N RUBBER SEAL - HARD PLASTIC BACK-UPS
TEMPERATURE RANGE	-35° to +220° F
PRESSURE RANGE	0 to 5,000 PSI
SPEED	3 FT/SEC
PART NUMBER	(Prefix) - (Size)

Select options Details

TR ROD T-SEALS

$5.98 – $134.31

Intermediate and Wide Base T-Seals are designed to fit MIL-5514F o-ring glands only and interchange with 1 o-ring / 1 back-up ring and 1 o-ring / 2 back-up ring grooves, respectively.

SEAL INFORMATION
MATERIAL	BUNA-N RUBBER SEAL - HARD PLASTIC BACK-UPS
TEMPERATURE RANGE	-35° to +220° F
PRESSURE RANGE	0 to 5,000 PSI
SPEED	3 FT/SEC
PART NUMBER	(Prefix) - (Size)

Select options Details

U U-SEALS

$4.24 – $582.49

Style 800 U-seals are molded from tough, abrasion-resistant polyurethane. The four lobed expander ring energizes the sealing lips, even at zero pressure, to help prevent 'weeping' when the system is idle.

FLUOROCARBON = "V"

SEAL INFORMATION
MATERIAL	95A URETHANE \| 95A FLUOROCARBON
TEMPERATURE RANGE	-65° to +220° F \| -20° to +400° F
PRESSURE RANGE	0 to 5,000 PSI \| 0 to 2,000 PSI
SPEED	3 FT/SEC
PART NUMBER	(Prefix)(CS) - (Inside Dia) - (Height)
	Standard - Height and cross section are equal, thus giving a square seal. Utilizes type 'D' lip. Typical Part Number U25-2.50
	Deep - Utilizes the same 'D' lip, but the seal height is greater than the cross section, thus giving a rectangular shape. Typical Part Number U25-2.50-37D
	Type SQB - Same dimensions as the Standard seal. Beveled lip design provides better film breaking. Utilizes type 'B' lip. Typical Part Number U25-2.50-SQB
	Type B - Same dimensions as the Deep seal. Beveled lip design provides better film breaking. Utilizes type 'B' lip. Typical Part Number U25-2.50-37B

Select options Details

U-Z U-SEALS

$7.54 – $463.46

The Z-Seal is a squeeze type seal, combining the excellent sealability and low compression set of a resilient rubber lip with the greater anti-extrusion characteristics of a hard thermoplastic base. Under low pressure conditions, the sealing lip provides its own compressive seal force. As pressure increases, hydrostatic pressure is mechanically transmitted through the elastomeric seal element into the anti-extrusion base. The applied force then deflects radially in a controlled manner, closing the extrusion gap behind the sealing lip. Under this condition, maximum sealing effectiveness is achieved.

SEAL INFORMATION
MATERIAL	95A URETHANE 70A NITRILE RUBBER
TEMPERATURE RANGE	-40° to +200° F
PRESSURE RANGE	0 to 5,000 PSI
SPEED	3 FT/SEC
PART NUMBER	(Prefix)(CS) - (Inside Dia) - (Height)
	Suffix: ZF = Fluorotrel (-40° to +235° F) ZL = Low Temperature Nitrile Sealing Lip (-65° to +200° F) ZLF = (-65° to +200° F)

Select options Details

UFN PISTON SEALS

$8.52 – $36.71
Constructed of a rubber seal lip with a rubberized fabric heel, these seals feature a poly-acetal bearing ring or a poly-acetal anti-extrusion ring. These seals offer excellent sealing ability and high pressure capability. Commonly are used with the SR retention rings.

MATERIAL RUBBER, FABRIC, ACETAL

TEMPERATURE RANGE -22° to +212° F

PRESSURE RANGE 0 to 5,800 PSI

SPEED 1.5 FT/SEC

PART NUMBER (Prefix)(CS) - (ID) - (Height)
Select options This product has multiple variants. The options may be chosen on the product page Details
UFN-EI ROD U-SEALS

$7.52 – $149.88
Incorporating a rubber seal lip, a rubberized fabric heel and an acetal back-up ring. This seal provides excellent sealability and high extrusion resistance.

RUBBER, FABRIC, ACETAL

TEMPERATURE RANGE -22° to +212° F

PRESSURE RANGE 0 to 5,800 PSI

SPEED 1.5 FT/SEC

PART NUMBER (Prefix)(CS) - (ID) - (Height)
Select options This product has multiple variants. The options may be chosen on the product page Details

UFN-P U-SEALS

$5.30 – $81.86

Incorporating a rubber seal lip and a rubberized fabric heel, this seal provides excellent sealability and high strength.

SEAL INFORMATION
MATERIAL	RUBBER & FABRIC
TEMPERATURE RANGE	-22° to +212° F
PRESSURE RANGE	0 to 2,900 PSI
SPEED	1.5 FT/SEC
PART NUMBER	(Prefix)(CS) - (Inside Dia) - (Height)

Select options Details