• UKP PISTON U-SEALS

    $4.24$76.75
    UKP u-seals are designed to act as a positive sealing, low friction replacement for conventional rubber u-seals. Molded from polyurethane, UKP u-seals provide long life and high resistance against extrusion. Low friction allows these seals to run smoothly in lubricated or non-lubricated cylinder. Available for bore sealing, the flexible dynamic lip provides very low breakaway friction and steady motion.
    • MATERIAL 90A URETHANE
    • TEMPERATURE RANGE -40° to +200° F
    • PRESSURE RANGE 0 to 150 PSI
    • SPEED 3 FT/SEC
    • PART NUMBER (Prefix)(CS) - (ID) - (Height)
  • UKR ROD U-SEALS

    $4.29$11.12
    UKR u-seals are designed to act as a positive sealing, low friction replacement for conventional rubber u-seals. Molded from polyurethane, UKR u-seals provide long life and high resistance against extrusion. Low friction allows these seals to run smoothly in lubricated or non-lucricated cylinder. Available for rod sealing, the flexible dynamic lip provides very low breakaway friction and steady motion.
    • MATERIAL 90A URETHANE
    • TEMPERATURE RANGE -40° to +200° F
    • PRESSURE RANGE 0 to 150 PSI
    • SPEED 3 FT/SEC
    • PART NUMBER (Prefix)(CS) - (ID) - (Height)
  • UPU U-SEALS

    $15.87$179.54
    Style UPU Premium U-Seals are molded from ultra tough urethane for severe service conditions. They feature higher tensile strength and modulus for extrusion resistance. These seals are used in high energy services such as rock drills and shock absorbing devices where high internal heat is generated.
    SEAL INFORMATION
    MATERIAL 93A URETHANE
    TEMPERATURE RANGE -65° to +300° F
    PRESSURE RANGE 0 to 5,000 PSI
    SPEED 3 FT/SEC
    PART NUMBER (Prefix)(CS) - (Inside Dia) - (Height)
    Standard - Height and cross section are equal, thus giving a square seal. Utilizes type 'D' lip. Typical Part Number UPU25-2.50
    Deep - Utilizes the same 'D' lip, but the seal height is greater than the cross section, thus giving a rectangular shape. Typical Part Number UPU25-2.50-37D
    Type SQB - Same dimensions as the Standard seal. Beveled lip design provides better film breaking. Utilizes type 'B' lip. Typical Part Number UPU25-2.50-SQB
    Type B - Same dimensions as the Deep seal. Beveled lip design provides better film breaking. Utilizes type 'B' lip. Typical Part Number UPU25-2.50-37B
  • SEAL RETAINER CROSS REFERENCE
    Hercules Sealing Prefix Ramsey Spirolox Prefix
    VH- UR-
    WH- RR-
    WHM- RRN-
    WHT- RRT-
  • The individual vee rings and adaptors listed here are the same high quality product found in our assembled vee packing sets. Stocking individual vee rings allows you to assemble sets to your specific requirements.

    RING TYPES
    T = TOP ADAPTOR - NYLON
    B = BOTTOM ADAPTOR - NYLON/ NEO-FAB
    F = NEO-FAB VEE RING
    U = URETHANE VEE RING
    R = RUBBER VEE RING.
    (FOR MORE RUBBER VEE RINGS SEE OUR STYLE 835 RINGS)

    SEAL INFORMATION
    MATERIAL NYLON, NEO-FAB URETHANE
    TEMPERATURE RANGE -35° to +220° F
    PRESSURE RANGE 0 to 5,000 PSI
    SPEED 1.5 FT/SEC
    PART NUMBER (Prefix) - (ID) (CS) (Type of Ring)
  • VS VEE PACKING SETS

    $0.78$682.61
    Our vee sets are the finest quality available in the industry. While all sets incorporate fabric reinforced rubber pressure rings, one or two urethane rings are included to improve low pressure sealing, when it is feasible. Most sets use nylon adaptors. Properly installed the pressure limits are as follows: 3,000 PSI = 4 VEES 5,000 PSI = 5 VEES 10,000 PSI = 6 VEES CONSTRUCTION CODE Example: FA-2U-3F-MA FA - 1 TOP ADAPTOR 2U - 2 URETHANE VEE RINGS 2F - 2 FABRIC VEE RINGS MA - 1 BOTTOM ADAPTOR V= FLUOROCARBON U= SPECIAL URETHANE VEE H= HYTREL W= WIPER INCLUDED
    SEAL INFORMATION
    MATERIAL FABRIC REINFORCED RUBBER
    URETHANE RING/NYLON ADAPTORS
    TEMPERATURE RANGE -35° to +220° F
    PRESSURE RANGE 0 to 10,000 PSI
    SPEED 1.5 FT/SEC
    PART NUMBER (Type of Seal) (ID) (CS) X (Height)
  • SEAL RETAINER CROSS REFERENCE
    Hercules Sealing Prefix Ramsey Spirolox Prefix
    VS- US-
    WS- RS-
    WST- RSN-
    WSM- RST-

Title

Go to Top