- Page 4 of 14 - Seal & Cylinder Source, Inc.

PS2470 PISTON SEAL ASSEMBLIES

$17.95 – $139.73

These piston seals provide bi-directional, low friction sealing with increased stability and superior leakage control. The square cut energizer provides low pressure sealing and eliminates backside leakage. This seal also effectively seals between different fluids on each side of the piston seal, making gas/liquid sealing combinations possible.

SEAL INFORMATION
MATERIAL	40% BRONZE FILLED PTFE SEAL, RUBBER ENERGIZER
TEMPERATURE RANGE	-40° to +220° F
PRESSURE RANGE	0 to 5,000 PSI
SPEED	12 FT/SEC
SPEED	12 FT/SEC
PART NUMBER	(Piston Seal)(Type of Seal) - (Size)

Select options Details

PS2000 PISTON SEAL ASSEMBLIES

$13.86 – $159.91

Nylon Step Cut
Some PS2000 piston seals utilize a round instead of a square energizer. Also, piston diameter "I" dimensions are given for pistons without wear rings. Many sizes shown are completely interchangeable with style PS914 piston seals.

SEAL INFORMATION
MATERIAL	GLASS FILLED NYLON SEAL RUBBER ENERGIZER
TEMPERATURE RANGE	-40° to +220° F
PRESSURE RANGE	0 to 5,000 PSI
SPEED	3 FT/SEC
PART NUMBER	(Piston Seal)(Type of Seal) - (Size) - (Groove Width)

Select options Details

PS1900 NON-STANDARD PISTON SEAL ASSEMBLIES

$23.12 – $93.46

These specifically sized seals are for certain OEM cylinders (primarily Heil & Timberjack). Their use is intended for existing housings where the old seals are dimensionally comparable to the table below. Please call your sales representative if you need additional assistance.

SEAL INFORMATION
MATERIAL	GLASS FILLED PTFE SEAL RUBBER ENERGIZER
TEMPERATURE RANGE	-40° to +220° F
PRESSURE RANGE	0 to 5,000 PSI
SPEED	12 FT/SEC
PART NUMBER	(Piston Seal)(Type of Seal) - (Size)

Select options Details

PS1850 PISTON SEAL ASSEMBLIES

$10.86 – $273.79

The PS1850 piston seal can be used interchangeably with the PS1800 style piston seal. This seal provides improved heat resistance for demanding applications. NOTE: Piston diameter 'I' dimensions are given for pistons without wear rings.

SEAL INFORMATION
MATERIAL	BRONZE FILLED PTFE SEAL RUBBER ENERGIZER
TEMPERATURE RANGE	-40° to +220° F
PRESSURE RANGE	0 to 5,000 PSI
SPEED	12 FT/SEC
PART NUMBER	(Piston Seal)(Type of Seal) - (Size)

Select options Details

PS1800 PISTON SEAL ASSEMBLIES

$7.28 – $214.96

The PS1800 provides low friction, high strength piston sealing. The PS1800 also provides double-acting piston sealing in a compact design that meets the requirements of ANSI/B93-32-1973. NOTE: Piston diameter 'I' dimensions are given for pistons without wear rings.

SEAL INFORMATION
MATERIAL	15% GLASS FILLED PTFE SEAL RUBBER ENERGIZER
TEMPERATURE RANGE	-40° to +220° F
PRESSURE RANGE	0 to 5,000 PSI
SPEED	12 FT/SEC
PART NUMBER	(Piston Seal)(Type of Seal) - (Size)

Select options Details

PS1500 PISTON SEAL ASSEMBLIES

$5.12 – $17.28

Totally interchangeable with Style PS1400 PTFE piston seals, Style PS1500 piston seals are molded from tough 60 shore D durometer polyurethane. During the molding process, a .002 in. thick band of molybdenum is molded into the outside diameter of the seal ring for reduced friction. PS1500 piston seals are easily stretched over the piston and recover rapidly with the elimination of the 'cold flow' characteristics found in PTFE seals. Piston diameter 'F' dimensions are given for pistons without wear rings.

SEAL INFORMATION
MATERIAL	POLYURETHANE SEAL RUBBER ENERGIZER
TEMPERATURE RANGE	-40° to +200° F
PRESSURE RANGE	0 to 5,000 PSI
SPEED	3 FT/SEC
PART NUMBER	(Piston Seal)(Type of Seal) - (Size)

Select options Details

PS1400 PISTON SEAL ASSEMBLIES

$5.27 – $193.07

INSTALLATION OF PTFE PISTON SEALS
Installing PTFE piston seals is not always an easy task. The use of installation tools is recommended but often not convenient when working with a wide variety of sizes and applications. Finger installations are practical with rings of smaller cross-sections. Using fingers or a rounded plastic stick, knead the ring over the piston into the groove. With rings of larger cross-sections it may be necessary to heat the ring. Warming the ring in water or oil at 130&deg F or 140&deg F for about 5 minutes will soften the material for easier installation. Always avoid inconsistent stretching or overstretching of the PTFE seal.

To prevent the PTFE ring from snapping into the wrong groove, cover wear ring grooves with plastic tape.

After seal installation, assembly of the cylinder may be difficult if the piston seal is loose on the piston or the cylinder has an inadequate leading edge chamfer. In such cases, compress the piston seal with belting or a suitable hose clamp. If the piston seal must pass threads or any other sharp edges during the cylinder assembly, cover the edges with plastic tape or wrap.

SEAL INFORMATION
MATERIAL	15% GLASS FILLED PTFE SEAL RUBBER ENERGIZER
TEMPERATURE RANGE	-40° to +220° F
PRESSURE RANGE	0 to 5,000 PSI
SPEED	12 FT/SEC
PART NUMBER	(Piston Seal)(Type of Seal) - (Size)

Select options Details

PRC Rings

$6.15 – $84.05
Used as a companion to our 'B' lip configured, Style 850 U-Seal. Style 855 PRC rings convert a uni-directional u-seal into a bi-directional seal. NOTE: Height dimension is the increase in groove width required.

MATERIAL 95A URETHANE

TEMPERATURE RANGE -40° to +200° F

PRESSURE RANGE 0 to 5,000 PSI

SPEED 3 FT/SEC

PART NUMBER (Prefix)(CS) - (Inside Diameter)
Select options This product has multiple variants. The options may be chosen on the product page Details

Polyurethane U-SEALS

$4.53 – $202.37

Style 850 u-seals offer excellent resistance to extrusion and abrasion. The round cross-section expander offers energized sealing from zero to 5,000 psi.

FLUOROCARBON = "V"

BFM = 58D DUROMETER FLUOROTREL -65° TO +275° F BHN = 85A DUROMETER HYDROGENATED NITRILE -50° to +320° F BPM = 58D DUROMETER POLYMYTE -65° to +275° F / -65° to +180° F IN WATER BASED FLUIDS

SEAL INFORMATION
MATERIAL	90A FLUOROCARBON \| 95A URETHANE
TEMPERATURE RANGE	-20° to +400° F \| -40° to +200° F
PRESSURE RANGE	0 to 2,000 PSI \| 0 to 5,000 PSI
SPEED	3 FT/SEC
PART NUMBER	(Prefix)(CS) - (Inside Dia) - (Height)
	Standard - Height and cross section are equal, thus giving a square seal. Utilizes type 'D' lip Typical Part Number P25-02.500
	Deep - Utilizes the same 'D' lip, but the seal height is greater than the cross section, thus giving a retangular shape. Typical Part Number P25-02.500-37D
	Type B - Same dimensions as the Deep seal. Beveled lip design provides better film breaking. Utilizes type 'B' lip. Typical Part Number U25-02.500-37B

Select options Details

PB POWERBANDS

$6.12 – $43.84

SCS Powerbands®
SCS Sealing Products is pleased to introduce our new line of Powerband® tight tolerance premium wear-rings. Manufactured from a highly engineered blend of premium nylon, glass fiber, and PTFE, Powerbands® offer a high strength wear-ring for all cylinder applications, including those with minimal lubrication. And, with a coefficient of friction nearly 50% lower than our standard product, your cylinders will run smoother and more efficiently than ever.

All Powerbands® are fully machined with cross-section tolerances of only ±0.001 in, chamfered corners, and scarf or angle-cut end gaps. Compared to standard tolerances of ±0.0025 in., this tightened tolerance improves the alignment and concentric operation of cylinder rods and pistons. The fully machined chamfered corners will better accommodate cylinder housing grooves, further improving piston and rod alignment. Lastly, the scarf-cut end gap reduces the loss of bearing support that may occur during cylinder side-loading. When combined, these features reduce the tolerance stack-up within the components of the cylinder. As a result, your cylinders will operate more consistently and be capable of operating at higher pressures and higher side loads than with standard wear-ring products. Furthermore, with this improved cylinder operation, your seals will last longer and the life of your cylinder will be extended. Powerbands® are currently available in our most popular wear-ring dimensions, as shown here. If you do not see your size or would like more information on this innovative product, please contact SCS.

SEAL INFORMATION
TEMPERATURE RANGE	-40° to +275° F
TENSILE STRENGTH	20,000 PSI
FLEXURAL STRENGTH	34,000 PSI
COMPRESSIVE STRENGTH	20,000 PSI
PART NUMBER	(Prefix) - (OD) - (Height)

Select options Details

PA UNITIZED PISTON ASSEMBLIES

$98.42 – $244.78

The PA Unitized Pistons are designed to handle a broad range of application parameters. The piston body is machined to exact dimensions and is constructed using four components: A high strength steel body, a non-metallic bearing, a rubber loading ring and a filled PTFE seal ring. The non-metallic bearing is molded to the piston using a special proprietary process.

SEAL INFORMATION
TEMPERATURE RANGE	-40° to +275° F
MAX PRESSURE	5,000 PSI
MAX VELOCITY	3 ft / second
MATERIAL	STEEL, NYLON, NBR, PTFE
PART NUMBER	(PREFIX) - (OD) X (ID) X (HT)

Select options Details

OS OIL SEALS

$2.98 – $277.47

SCS offers several sizes of standard sized metal clad oil seals. These seals are for rotating shafts and are specifically designed to prevent oil or grease leakage at maximum pressures of 10 PSI and temperature of 240 deg. F. Additional style and sizes are available upon request.

SEAL INFORMATION
MATERIAL	RUBBER
TEMPERATURE RANGE	-40° to +240° F
PRESSURE RANGE	10 PSI MAXIMUM
SPEED	3 FT/SEC
PART NUMBER	(Prefix) - (Size) - (Style)

Select options Details

O-RING CORD STOCK

$0.81 – $3.41

Select options This product has multiple variants. The options may be chosen on the product page Details
NAN INTERNAL RETAINER RINGS

$2.50 – $5.12

EATON NAN SERIES INTERNAL RETAINER RINGS

Select options This product has multiple variants. The options may be chosen on the product page Details

MYR BUFFER SEALS

$8.86 – $310.27

Molded in urethane and employing a back-up, this seal absorbs the shock of pressure spikes protecting the rod seal. The unique design relieves back pressure between the buffer and the rod seal.

SEAL INFORMATION
MATERIAL	URETHANE BUFFER NYLON BACK-UP
TEMPERATURE RANGE	-30° to +220° F
PRESSURE RANGE	0 to 7,000 PSI
SPEED	3 FT/SEC
PART NUMBER	(Prefix) - (ID) x (OD) x (H)

Select options Details

MYBR BUFFER SEALS

$11.90 – $48.75

Molded in PTFE with a rubber energizer, this seal absorbs the shock of pressure spikes protection the rod seal. This style relieves back pressure by way of slots on the pressure side of the energizer

SEAL INFORMATION
MATERIAL	FILLED PTFE BUFFER 70A NITRILE ENERGIZER
TEMPERATURE RANGE	-40° to +220° F
PRESSURE RANGE	0 to 5,000 PSI
SPEED	12FT/SEC
PART NUMBER	(Prefix) - (ID) x (OD) x (H)

Select options Details