- Page 5 of 14 - Seal & Cylinder Source, Inc.

MIR BUFFER SEALS

$4.20 – $23.65

Molded in polyurethane this buffer is a simple flat, washer-like profile

SEAL INFORMATION

MATERIAL URETHANE

TEMPERATURE RANGE -40° to +200° F

PRESSURE RANGE 0 to 5,000 PSI

SPEED 3 FT/SEC

PART NUMBER (Prefix) - (ID) x (OD) x (H)

Select options This product has multiple variants. The options may be chosen on the product page Details
CSW WIPER RINGS

$4.21 – $13.62

Snap-In Wiper

SEAL INFORMATION

MATERIAL NYLON

TEMPERATURE RANGE -40° to +212° F

SPEED 3 FT/SEC

PART NUMBER (Prefix) - (Size)

Select options This product has multiple variants. The options may be chosen on the product page Details
UKP PISTON U-SEALS

$4.24 – $76.75
UKP u-seals are designed to act as a positive sealing, low friction replacement for conventional rubber u-seals. Molded from polyurethane, UKP u-seals provide long life and high resistance against extrusion. Low friction allows these seals to run smoothly in lubricated or non-lubricated cylinder. Available for bore sealing, the flexible dynamic lip provides very low breakaway friction and steady motion.

MATERIAL 90A URETHANE

TEMPERATURE RANGE -40° to +200° F

PRESSURE RANGE 0 to 150 PSI

SPEED 3 FT/SEC

PART NUMBER (Prefix)(CS) - (ID) - (Height)
Select options This product has multiple variants. The options may be chosen on the product page Details

SEAL INFORMATION
MATERIAL	NYLON
TEMPERATURE RANGE	-40° to +212° F
SPEED	3 FT/SEC
PART NUMBER	(Prefix) - (Size)

U U-SEALS

$4.24 – $582.49

Style 800 U-seals are molded from tough, abrasion-resistant polyurethane. The four lobed expander ring energizes the sealing lips, even at zero pressure, to help prevent 'weeping' when the system is idle.

FLUOROCARBON = "V"

SEAL INFORMATION
MATERIAL	95A URETHANE \| 95A FLUOROCARBON
TEMPERATURE RANGE	-65° to +220° F \| -20° to +400° F
PRESSURE RANGE	0 to 5,000 PSI \| 0 to 2,000 PSI
SPEED	3 FT/SEC
PART NUMBER	(Prefix)(CS) - (Inside Dia) - (Height)
	Standard - Height and cross section are equal, thus giving a square seal. Utilizes type 'D' lip. Typical Part Number U25-2.50
	Deep - Utilizes the same 'D' lip, but the seal height is greater than the cross section, thus giving a rectangular shape. Typical Part Number U25-2.50-37D
	Type SQB - Same dimensions as the Standard seal. Beveled lip design provides better film breaking. Utilizes type 'B' lip. Typical Part Number U25-2.50-SQB
	Type B - Same dimensions as the Deep seal. Beveled lip design provides better film breaking. Utilizes type 'B' lip. Typical Part Number U25-2.50-37B

Select options Details

UKR ROD U-SEALS

$4.29 – $11.12
UKR u-seals are designed to act as a positive sealing, low friction replacement for conventional rubber u-seals. Molded from polyurethane, UKR u-seals provide long life and high resistance against extrusion. Low friction allows these seals to run smoothly in lubricated or non-lucricated cylinder. Available for rod sealing, the flexible dynamic lip provides very low breakaway friction and steady motion.

MATERIAL 90A URETHANE

TEMPERATURE RANGE -40° to +200° F

PRESSURE RANGE 0 to 150 PSI

SPEED 3 FT/SEC

PART NUMBER (Prefix)(CS) - (ID) - (Height)
Select options This product has multiple variants. The options may be chosen on the product page Details
MSR RETAINER RINGS

$4.40 – $9.47

These rings are split for ease of installation and are retained in a groove. Their use is primarily to retain a single acting piston seal. Commonly they are used with MUFN style piston seals.

SEAL INFORMATION

MATERIAL ACETAL

TEMPERATURE RANGE -22° to +212° F

PART NUMBER (Prefix) - (ID) x (OD)

Select options This product has multiple variants. The options may be chosen on the product page Details

SEAL INFORMATION
MATERIAL	ACETAL
TEMPERATURE RANGE	-22° to +212° F
PART NUMBER	(Prefix) - (ID) x (OD)

Polyurethane U-SEALS

$4.53 – $202.37

Style 850 u-seals offer excellent resistance to extrusion and abrasion. The round cross-section expander offers energized sealing from zero to 5,000 psi.

FLUOROCARBON = "V"

BFM = 58D DUROMETER FLUOROTREL -65° TO +275° F BHN = 85A DUROMETER HYDROGENATED NITRILE -50° to +320° F BPM = 58D DUROMETER POLYMYTE -65° to +275° F / -65° to +180° F IN WATER BASED FLUIDS

SEAL INFORMATION
MATERIAL	90A FLUOROCARBON \| 95A URETHANE
TEMPERATURE RANGE	-20° to +400° F \| -40° to +200° F
PRESSURE RANGE	0 to 2,000 PSI \| 0 to 5,000 PSI
SPEED	3 FT/SEC
PART NUMBER	(Prefix)(CS) - (Inside Dia) - (Height)
	Standard - Height and cross section are equal, thus giving a square seal. Utilizes type 'D' lip Typical Part Number P25-02.500
	Deep - Utilizes the same 'D' lip, but the seal height is greater than the cross section, thus giving a retangular shape. Typical Part Number P25-02.500-37D
	Type B - Same dimensions as the Deep seal. Beveled lip design provides better film breaking. Utilizes type 'B' lip. Typical Part Number U25-02.500-37B

Select options Details

MUFN-P U-SEALS

$4.57 – $47.43

Incorporating a rubber seal lip and a rubberized fabric heel, this seal provides excellent sealability and high strength.

SEAL INFORMATION
MATERIAL	NITRILE / FABRIC BASE
TEMPERATURE RANGE	-22° to +212° F
PRESSURE RANGE	0 to 2,900 PSI
SPEED	1.5 FT/SEC
PART NUMBER	(Prefix) - (ID) x (OD) x (H)

Select options Details

CSWM WIPER RINGS

$4.60 – $36.23

This wiper is a heavy duty scraper molded from a hard nylon material.

SEAL INFORMATION

MATERIAL NYLON

TEMPERATURE RANGE -40° to +212° F

SPEED 3 FT/SEC

PART NUMBER (Prefix) - (ID) x (OD) X (H)

Select options This product has multiple variants. The options may be chosen on the product page Details
CTC – 1 PIECE ROD BUFFER SEALS

$4.77 – $25.50

Caterpillar - 1 Piece Rod Buffer Seal

SEAL INFORMATION

MATERIAL 92A URETHANE

TEMPERATURE RANGE -40° TO +200° F

PRESSURE RANGE 0 to 5,000 PSI

SPEED 3 FT/SEC 12FT/SEC

Select options This product has multiple variants. The options may be chosen on the product page Details
MRTS – MUTS – MRTSB ROD U-SEALS

$4.77 – $20.64

Designed specifically for rod application, the short lip design and solid 'U' cavity provide high sealability at low pressure. At the heel, a secondary lip provides stability, friction-reducing lube retention, and a contaminant blocker. Molded in polyurethane for excellent wear resistance.

SEAL INFORMATION

MATERIAL URETHANE

TEMPERATURE RANGE -22° to +220° F

PRESSURE RANGE 0 to 5,000 PSI

SPEED 3 FT/SEC

PART NUMBER (Prefix) - (ID) x (OD) x (H)

Select options This product has multiple variants. The options may be chosen on the product page Details

SEAL INFORMATION
MATERIAL	NYLON
TEMPERATURE RANGE	-40° to +212° F
SPEED	3 FT/SEC
PART NUMBER	(Prefix) - (ID) x (OD) X (H)

SEAL INFORMATION
MATERIAL	92A URETHANE
TEMPERATURE RANGE	-40° TO +200° F
PRESSURE RANGE	0 to 5,000 PSI
SPEED	3 FT/SEC 12FT/SEC

MUUL U-SEALS

$4.83 – $122.72

Molded from tough polyurethane material, these seals offer high resistance to wear and abrasion. Energized with a four-lobed ring they have greatly increased low pressure performance.

SEAL INFORMATION
MATERIAL	URETHANE
TEMPERATURE RANGE	-40° to +200° F
PRESSURE RANGE	0 to 5,000 PSI
SPEED	3 FT/SEC
SUFFIX	HT = HIGH TEMPERATURE
PART NUMBER	(Prefix) - (ID) x (OD) x (H)

Select options Details

RSR RETAINER RINGS

$4.98 – $52.81

Select options This product has multiple variants. The options may be chosen on the product page Details

6000 PISTON CUPS

$5.03 – $82.02

NOTE: The 6000 piston cups are center punched if there is no hole size indicated.

SEAL INFORMATION
MATERIAL	BUNA-N RUBBER
TEMPERATURE RANGE	-40° to +220° F
PRESSURE RANGE	0 to 150 PSI
SPEED	3 FT/SEC
PART NUMBER	(Piston Cup Type)(Bore) - (Hole Size)

Select options Details

PS1500 PISTON SEAL ASSEMBLIES

$5.12 – $17.28

Totally interchangeable with Style PS1400 PTFE piston seals, Style PS1500 piston seals are molded from tough 60 shore D durometer polyurethane. During the molding process, a .002 in. thick band of molybdenum is molded into the outside diameter of the seal ring for reduced friction. PS1500 piston seals are easily stretched over the piston and recover rapidly with the elimination of the 'cold flow' characteristics found in PTFE seals. Piston diameter 'F' dimensions are given for pistons without wear rings.

SEAL INFORMATION
MATERIAL	POLYURETHANE SEAL RUBBER ENERGIZER
TEMPERATURE RANGE	-40° to +200° F
PRESSURE RANGE	0 to 5,000 PSI
SPEED	3 FT/SEC
PART NUMBER	(Piston Seal)(Type of Seal) - (Size)

Select options Details

PSC PISTON SEAL ASSEMBLIES

$5.15 – $176.73

The Style PSC is a double acting piston seal designed to replace o-rings, quad-rings, and T-seals with the same groove dimensions (O-ring dash number). Style 575 urethane back-up rings may be added to either or both sides of the 'PSC' to accommodate wider groove widths. The PSC is made of 95A Durometer polyurethane, giving it high extrusion and abrasion resistance. The crowned sealing surface produces a positive seal from vacuum to high pressure.

NOTE: Piston diameter 'I' dimensions are given for pistons without wear rings.

SEAL INFORMATION
MATERIAL	95A POLYURETHANE SEAL 70 A NITRILE ENERGIZER
TEMPERATURE RANGE	-40° to +200° F
PRESSURE RANGE	0 to 5,000 PSI
SPEED	3 FT/SEC
PART NUMBER	(Prefix) - (O-Ring Size) - (Wide Base)

These Style PSC are molded from Fluorotrel which is a tough, wear-resistant material able to run at temperatures up to 275° F. Fluorotrel is also resistant to fluids that are incompatible with polyurethane such as water, glycol, water in oil, mineral oil and petroleum. Consult our Engineering Department for other fluids compatible with Fluorotrel
NOTE: Piston diameter "I" dimensions are given for pistons without wear rings.

SEAL INFORMATION
MATERIAL	55D FLUOROTREL SEAL 70A NITRILE ENERGIZER
TEMPERATURE RANGE	-40° to +235° F
PRESSURE RANGE	0 to 5,000 PSI
PART NUMBER	(Prefix) - (O-Ring Size) - (Fluorotrel)

Select options Details