| SEAL INFORMATION | |
|---|---|
| MATERIAL | NYLON |
| TEMPERATURE RANGE | -40 ° TO +250°F |
| PRESSURE RANGE | VARIES ACCORDING TO DIAMETRAL CLEARANCE |
| PART NUMBER | (Prefix) - (Dash No.) |
-
Split Nylon -
Used primarily as an anti-extusion device for u-seals, these back-up rings combine high performance with very low friction. 'ST' suffix designates a split ring.
SEAL INFORMATION MATERIAL PTFE TEMPERATURE RANGE -100° TO +500°F PRESSURE RANGE VARIES ACCORDING TO DIAMETRAL CLEARANCE PART NUMBER (prefix) - (Dash No.) (config.) -
EXTERNAL RETAINER RINGS (TRU-ARC TYPE) -
EATON NAN SERIES INTERNAL RETAINER RINGS -
U-Seal Retainer Ring
These rings are split for ease of installation and are retained in a groove. Their use is primarily to retain a single acting piston seals. Commonly used with UFN style piston seals.SEAL INFORMATION MATERIAL ACETAL TEMPERATURE RANGE -22 ° TO +212°F -
SEAL RETAINER CROSS REFERENCE Hercules Sealing Prefix Ramsey Spirolox Prefix VH- UR- WH- RR- WHM- RRN- WHT- RRT- -
SEAL RETAINER CROSS REFERENCE Hercules Sealing Prefix Ramsey Spirolox Prefix VS- US- WS- RS- WST- RSN- WSM- RST- -
These seals are specifically designed with a second lip on their inside diameter and engineered to attain maximum life and reliability in dynamic rod sealing. This feature results in reduced leakage, less friction, increased stability and prevents air and contaminants from entering the cylinder.
SEAL INFORMATION MATERIAL 92A URETHANE TEMPERATURE RANGE -65° to +230° F PRESSURE RANGE 0 to 6,000 PSI SPEED 3 FT/SEC PART NUMBER (Prefix)(CS) - (ID) - (Height) MAXIMUM EXTRUSION GAP PRESSURE 1000 PSI 3000 PSI 5000 PSI 6000 PSI MAX DIAM.
GAP0.032" 0.015" 0.012" 0.009" -
These seals are specifically designed to seal on their inside diameter and engineered to attain maximum life and reliability in dynamic rod sealing.
SEAL INFORMATION MATERIAL 92A URETHANE TEMPERATURE RANGE -65° to +230° F PRESSURE RANGE 0 to 6,000 PSI SPEED 3 FT/SEC PART NUMBER (Prefix)(CS) - (ID) - (Height) -
These seals are specifically designed to seal on their inside diameter and engineered to attain maximum life and reliability in dynamic rod sealing. They employ a hard plastic I.D. back-up ring to reduce the possibility of extrusion.
SEAL INFORMATION MATERIAL 92A URETHANE TEMPERATURE RANGE -40° to +230° F PRESSURE RANGE 0 to 6,000 PSI SPEED 3 FT/SEC PART NUMBER (Prefix)(CS) - (ID) - (Height) -
This wiper is a heavy duty scraper molded from a hard nylon material.
SEAL INFORMATION MATERIAL NYLON TEMPERATURE RANGE -40° to +212° F SPEED 3 FT/SEC PART NUMBER (Prefix) - (ID) x (OD) X (H) -
Internal Retainer Ring
-
External Retainer Rings
-
Installed as 2 halves in a closed groove, these bushings are found in many Japanese lift trucks.
SEAL INFORMATION MATERIAL 660 BRONZE SPEED 3 FT/SEC PART NUMBER (Prefix) - (ID) x (OD) X (H)
