| SEAL INFORMATION | |
|---|---|
| MATERIAL | BUNA-N |
| TEMPERATURE RANGE | -22° to +212° F |
| SPEED | 3 FT/SEC |
| PART NUMBER | (Prefix) (Size) |
-
-
SEAL INFORMATION MATERIAL BUNA-N TEMPERATURE RANGE -22° to +212° F SPEED 3 FT/SEC PART NUMBER (Prefix) (Size) -
T-Seals are non-spiraling and extrusion resistant to 5,000 psi with improved tolerances.
IB = Intermediate Base, WB = Wide Base
Intermediate and Wide Base T-Seals are designed to fit MIL-5514F o-ring glands only and interchange with 1 o-ring / 1 back-up ring and 1 o-ring / 2 back-up ring grooves, respectively.SEAL INFORMATION MATERIAL BUNA-N RUBBER SEAL - HARD PLASTIC BACK-UPS TEMPERATURE RANGE -35° to +220° F PRESSURE RANGE 0 to 5,000 PSI SPEED 3 FT/SEC PART NUMBER (Prefix) - (Size) -
The Style TP-L seal is a zero drift piston seal for bi-directional pressure applications. The locking anti-extrusion rings provide for an easier installation. It is designed to retrofit O-Ring and standard T-seal grooves. The 70 shore A NBR is designed specifically for performance in compression type dynamic seals. Other features include a net molded dynamic sealing surface and backup chamfers.
SEAL INFORMATION MATERIAL BUNA-N RUBBER SEAL - HARD PLASTIC BACK-UPS TEMPERATURE RANGE -35° to +220° F PRESSURE RANGE 0 to 5,000 PSI SPEED 3 FT/SEC PART NUMBER (Prefix) - (Size) -
Intermediate and Wide Base T-Seals are designed to fit MIL-5514F o-ring glands only and interchange with 1 o-ring / 1 back-up ring and 1 o-ring / 2 back-up ring grooves, respectively.
SEAL INFORMATION MATERIAL BUNA-N RUBBER SEAL - HARD PLASTIC BACK-UPS TEMPERATURE RANGE -35° to +220° F PRESSURE RANGE 0 to 5,000 PSI SPEED 3 FT/SEC PART NUMBER (Prefix) - (Size) -
Style 800 U-seals are molded from tough, abrasion-resistant polyurethane. The four lobed expander ring energizes the sealing lips, even at zero pressure, to help prevent 'weeping' when the system is idle.FLUOROCARBON = "V"
SEAL INFORMATION MATERIAL 95A URETHANE | 95A FLUOROCARBON TEMPERATURE RANGE -65° to +220° F | -20° to +400° F PRESSURE RANGE 0 to 5,000 PSI | 0 to 2,000 PSI SPEED 3 FT/SEC PART NUMBER (Prefix)(CS) - (Inside Dia) - (Height) 
Standard - Height and cross section are equal, thus giving a square seal. Utilizes type 'D' lip. Typical Part Number U25-2.50 
Deep - Utilizes the same 'D' lip, but the seal height is greater than the cross section, thus giving a rectangular shape. Typical Part Number U25-2.50-37D 
Type SQB - Same dimensions as the Standard seal. Beveled lip design provides better film breaking. Utilizes type 'B' lip. Typical Part Number U25-2.50-SQB 
Type B - Same dimensions as the Deep seal. Beveled lip design provides better film breaking. Utilizes type 'B' lip. Typical Part Number U25-2.50-37B -
The Z-Seal is a squeeze type seal, combining the excellent sealability and low compression set of a resilient rubber lip with the greater anti-extrusion characteristics of a hard thermoplastic base. Under low pressure conditions, the sealing lip provides its own compressive seal force. As pressure increases, hydrostatic pressure is mechanically transmitted through the elastomeric seal element into the anti-extrusion base. The applied force then deflects radially in a controlled manner, closing the extrusion gap behind the sealing lip. Under this condition, maximum sealing effectiveness is achieved.SEAL INFORMATION MATERIAL 95A URETHANE
70A NITRILE RUBBERTEMPERATURE RANGE -40° to +200° F PRESSURE RANGE 0 to 5,000 PSI SPEED 3 FT/SEC PART NUMBER (Prefix)(CS) - (Inside Dia) - (Height) 
Suffix:
ZF = Fluorotrel (-40° to +235° F)
ZL = Low Temperature Nitrile Sealing Lip
(-65° to +200° F)
ZLF = (-65° to +200° F) -
Constructed of a rubber seal lip with a rubberized fabric heel, these seals feature a poly-acetal bearing ring or a poly-acetal anti-extrusion ring. These seals offer excellent sealing ability and high pressure capability. Commonly are used with the SR retention rings. -
Incorporating a rubber seal lip, a rubberized fabric heel and an acetal back-up ring. This seal provides excellent sealability and high extrusion resistance. -
Incorporating a rubber seal lip and a rubberized fabric heel, this seal provides excellent sealability and high strength.SEAL INFORMATION MATERIAL RUBBER & FABRIC TEMPERATURE RANGE -22° to +212° F PRESSURE RANGE 0 to 2,900 PSI SPEED 1.5 FT/SEC PART NUMBER (Prefix)(CS) - (Inside Dia) - (Height) -
UKP u-seals are designed to act as a positive sealing, low friction replacement for conventional rubber u-seals. Molded from polyurethane, UKP u-seals provide long life and high resistance against extrusion. Low friction allows these seals to run smoothly in lubricated or non-lubricated cylinder. Available for bore sealing, the flexible dynamic lip provides very low breakaway friction and steady motion. -
UKR u-seals are designed to act as a positive sealing, low friction replacement for conventional rubber u-seals. Molded from polyurethane, UKR u-seals provide long life and high resistance against extrusion. Low friction allows these seals to run smoothly in lubricated or non-lucricated cylinder. Available for rod sealing, the flexible dynamic lip provides very low breakaway friction and steady motion. -
Style UPU Premium U-Seals are molded from ultra tough urethane for severe service conditions. They feature higher tensile strength and modulus for extrusion resistance. These seals are used in high energy services such as rock drills and shock absorbing devices where high internal heat is generated.SEAL INFORMATION MATERIAL 93A URETHANE TEMPERATURE RANGE -65° to +300° F PRESSURE RANGE 0 to 5,000 PSI SPEED 3 FT/SEC PART NUMBER (Prefix)(CS) - (Inside Dia) - (Height) Standard - Height and cross section are equal, thus giving a square seal. Utilizes type 'D' lip. Typical Part Number UPU25-2.50 Deep - Utilizes the same 'D' lip, but the seal height is greater than the cross section, thus giving a rectangular shape. Typical Part Number UPU25-2.50-37D Type SQB - Same dimensions as the Standard seal. Beveled lip design provides better film breaking. Utilizes type 'B' lip. Typical Part Number UPU25-2.50-SQB Type B - Same dimensions as the Deep seal. Beveled lip design provides better film breaking. Utilizes type 'B' lip. Typical Part Number UPU25-2.50-37B -
SEAL RETAINER CROSS REFERENCE Hercules Sealing Prefix Ramsey Spirolox Prefix VH- UR- WH- RR- WHM- RRN- WHT- RRT- -
The individual vee rings and adaptors listed here are the same high quality product found in our assembled vee packing sets. Stocking individual vee rings allows you to assemble sets to your specific requirements.
RING TYPES
T = TOP ADAPTOR - NYLON
B = BOTTOM ADAPTOR - NYLON/ NEO-FAB
F = NEO-FAB VEE RING
U = URETHANE VEE RING
R = RUBBER VEE RING.
(FOR MORE RUBBER VEE RINGS SEE OUR STYLE 835 RINGS)
SEAL INFORMATION MATERIAL NYLON, NEO-FAB URETHANE TEMPERATURE RANGE -35° to +220° F PRESSURE RANGE 0 to 5,000 PSI SPEED 1.5 FT/SEC PART NUMBER (Prefix) - (ID) (CS) (Type of Ring) -
Our vee sets are the finest quality available in the industry. While all sets incorporate fabric reinforced rubber pressure rings, one or two urethane rings are included to improve low pressure sealing, when it is feasible. Most sets use nylon adaptors. Properly installed the pressure limits are as follows: 3,000 PSI = 4 VEES 5,000 PSI = 5 VEES 10,000 PSI = 6 VEES CONSTRUCTION CODE Example: FA-2U-3F-MA FA - 1 TOP ADAPTOR 2U - 2 URETHANE VEE RINGS 2F - 2 FABRIC VEE RINGS MA - 1 BOTTOM ADAPTOR V= FLUOROCARBON U= SPECIAL URETHANE VEE H= HYTREL W= WIPER INCLUDEDSEAL INFORMATION MATERIAL FABRIC REINFORCED RUBBER
URETHANE RING/NYLON ADAPTORSTEMPERATURE RANGE -35° to +220° F PRESSURE RANGE 0 to 10,000 PSI SPEED 1.5 FT/SEC PART NUMBER (Type of Seal) (ID) (CS) X (Height)