For two piece pistons, this seal incorporates a nitrile / fabric seal with two split bearings.
| SEAL INFORMATION | |||
|---|---|---|---|
| MATERIAL | NITRILE SEAL ACETAL BEARING |
||
| TEMPERATURE RANGE | -22° to +190° F | ||
| PRESSURE RANGE | 0 to 5,000 PSI | ||
| SPEED | 1.5 FT/SEC | ||
-
-
Molded in PTFE with a rubber energizer and a nylon anti-extrusion ring, this seal absorbs the shock of pressure spikes protecting the rod seal.
SEAL INFORMATION MATERIAL PTFE BUFFER
70A NBR ENERGIZER
NYLON BACK-UPTEMPERATURE RANGE -40° to +220° F PRESSURE RANGE 0 to 5,000 PSI SPEED 3 FT/SEC PART NUMBER (Prefix) - (ID) x (OD) x (H) -
A double acting piston seal with many features; two compact seal edges to concentrate the load against the dynamic surface, a cavity between the two external seal edges to retain fluid (reducing friction and wear), side grooves to allow pressure to load the energizer in all working conditions, high sealing performance at low pressure, excellent wear-resistance, and high resistance against extrusion.
SEAL INFORMATION MATERIAL 97A URETHANE SEAL
70A NITRILE EXPANDERTEMPERATURE RANGE -22° TO +210° F PRESSURE RANGE 0 TO 5,800 PSI SPEED 1.5 FT/SEC PART NUMBER (Prefix) - (OD) x (ID) x (W) MAXIMUM EXTRUSION GAP Pressure (PSI) 725 1450 2900 4350 5800 Max Diametrical Gap (inches) 0.047 0.031 0.016 0.010 0.007 -
Molded in polyurethane this buffer is a simple flat, washer-like profile
SEAL INFORMATION MATERIAL URETHANE TEMPERATURE RANGE -40° to +200° F PRESSURE RANGE 0 to 5,000 PSI SPEED 3 FT/SEC PART NUMBER (Prefix) - (ID) x (OD) x (H) -
Molded from urethane for resistance to extrusion and abrasion, they employ a hard nylon anti-extrusion ring.
SEAL INFORMATION MATERIAL URETHANE SEAL
NYLON BACK-UPTEMPERATURE RANGE -40° to +200° F SPEED 3 FT/SEC PRESSURE RANGE 0 to 3,000 PSI -
Molded from 70A nitrile for high sealability they employ a hard nylon anti-extrusion ring as a companion piece.
SEAL INFORMATION MATERIAL 70A NITRILE
ACETAL BACK-UPTEMPERATURE RANGE -20° to +220° F PRESSURE RANGE 0 to 4,000 PSI SPEED 3 FT/SEC PART NUMBER (PREFIX) - (OD) -
Molded from 70A nitrile for high sealability they employ a hard nylon anti-extrusion ring as a companion piece.
SEAL INFORMATION MATERIAL 70A NITRILE
ACETAL BACK-UPTEMPERATURE RANGE -20° to +220° F PRESSURE RANGE 0 to 4,000 PSI SPEED 3 FT/SEC PART NUMBER (PREFIX) - (OD) -
Molded from 70A nitrile for high sealability they employ a hard nylon anti-extrusion ring as a companion piece.
SEAL INFORMATION MATERIAL 70A NITRILE
NYLON BACK-UPTEMPERATURE RANGE -20° to +220° F PRESSURE RANGE 0 to 3,000 PSI SPEED 3 FT/SEC PART NUMBER (PREFIX) - (OD) -
Fabricated from woven fabric and polyester resins, this material can be cut to length to fit rod or piston grooves.
NOTE: List Price = 1 Foot (12")
TQ16 - Sold in rolls of 16 foot sectionsSEAL INFORMATION MATERIAL FABRICATED REINFORCED POLYESTER TEMPERATURE RANGE -30° to +265° F SPEED 3 FT/SEC COMPRESSIVE STRENGTH 24,000 PSI PART NUMBER (Prefix) - (W) x (TH) -
Molded in urethane with a steel case, this seal is double cased and used to exclude contaminants from cylinder link pins.
SEAL INFORMATION MATERIAL URETHANE LIP STEEL CASE
STEEL CASETEMPERATURE RANGE -30° to +200° F SPEED 3 FT/SEC -
This wiper is a molded from high grade urethane and bonded to a carbon steel case in a single lip design.
SEAL INFORMATION MATERIAL URETHANE TEMPERATURE RANGE -40° to +200° F SPEED 3 FT/SEC PART NUMBER (Prefix) - (ID) x (OD) X (H) -
SEAL INFORMATION MATERIAL BRONZE SPEED 3 FT/SEC PART NUMBER (Prefix) - (OD) x (W) x (RW) -
Placed in adjacent grooves on each side of style MPS piston seals they prevent cold flow or extrusion at high pressures.
SEAL INFORMATION MATERIAL NYLON TEMPERATURE RANGE -65° to +220° F PRESSURE RANGE 0 to 5,000 PSI PART NUMBER (Prefix) - (ID) x (CS) x (W) -
Installed as 2 halves in a closed groove, these bushings are found in many Japanese lift trucks.
SEAL INFORMATION MATERIAL 660 BRONZE SPEED 3 FT/SEC PART NUMBER (Prefix) - (ID) x (OD) X (H) -
External Retainer Rings
-
Internal Retainer Ring