STXE wipers are designed to retrofit the standard ST wiper groove while providing superior performance. The o-ring energizer limits dirt intrusion around the O.D. of the wiper. The energizer also makes this wiper more effective in applications with severe side deflections.
| SEAL INFORMATION | |
|---|---|
| MATERIAL | URETHANE WIPER RUBBER ENERGIZER |
| TEMPERATURE RANGE | -40° to +220° F |
| SPEED | 3 FT/SEC |
| PART NUMBER | (Prefix) - (Size) |
Suffix:
EI = Top adapter has an internal anti-extrusion ring.
DR = Dry-rod application. Pre-loaded male adapter
| SEAL INFORMATION | |
|---|---|
| MATERIAL | FABRIC / RUBBER VEE RINGS FABRIC / RUBBER OR ACETAL ADAPTORS |
| TEMPERATURE RANGE | -35° to +220° F |
| PRESSURE RANGE | 0 to 5,000 PSI |
| SPEED | 1.5 FT/SEC |
| PART NUMBER | (Prefix) - (ID) x (OD) x (H) |
Designed to fit on one or two piece pistons, this seal employs a nitrile seal element, PTFE split back-up rings and polyacetal split bearing rings.
| SEAL INFORMATION | |
|---|---|
| MATERIAL | NITRILE SEAL POLYACETAL ANTI-EXTRUSION RING |
| TEMPERATURE RANGE | -22° to +212° F |
| PRESSURE RANGE | 0 to 3,000 PSI |
| SPEED | 3 FT/SEC |
| PART NUMBER | (Prefix) - (O-Ring Size) |
| SEAL INFORMATION | |
|---|---|
| MATERIAL | URETHANE U-STYLE, POLYACETAL BACK-UP |
| TEMPERATURE RANGE | -40° to +230° F |
| PRESSURE RANGE | 0 to 8,000 PSI |
| SPEED | 3 FT/SEC |
| PART NUMBER | (Prefix)(CS) - (Inside Dia) - (O-Ring CS) / (Prefix)(CS) - (Inside Dia) - (Nom. Seal Height) |
Molded in urethane with a steel case, this seal is double cased and used to exclude contaminants from cylinder link pins.
| SEAL INFORMATION | |
|---|---|
| MATERIAL | URETHANE LIP STEEL CASE STEEL CASE |
| TEMPERATURE RANGE | -30° to +200° F |
| SPEED | 3 FT/SEC |
With nitrile seal bonded on each side by fabric material it also incorporates 2 full depth 'L' bearings to form a very strong assembly. This seal requires a two piece piston.
| SEAL INFORMATION | |||
|---|---|---|---|
| MATERIAL | 70A NBR / FABRIC SEAL ACETAL BEARING / BACK-UP |
||
| TEMPERATURE RANGE | -22° TO +212° F | ||
| PRESSURE RANGE | 0 TO 5,000 PSI | ||
| SPEED | 1.5 FT/SEC | ||
The MRUN Rod U-Seal is designed with improved oil resistance and compression set verses urethane seals. The addition of a u-seal back-up ring will increase the pressure range of the seal from 2,000 psi to 3,000 psi. A = Alternative to NOK
| SEAL INFORMATION | |
|---|---|
| MATERIAL | NITRILE |
| TEMPERATURE RANGE | -8° to +212° F |
| PRESSURE RANGE | 0 TO 2,000 PSI W/O BACK-UP 0 TO 3,000 PSI W/BACK-UP |
| SPEED | 3FT/SEC |
| SUFFIX | HT = HIGH TEMPERATURE NITRILE (-13° to +248° F) LT = LOW TEMPERATURE NITRILE (-67° to +176° F) |
| SEAL INFORMATION | |
|---|---|
| MATERIAL | 93A URETHANE |
| TEMPERATURE RANGE | -65° to +300° F |
| PRESSURE RANGE | 0 to 5,000 PSI |
| SPEED | 3 FT/SEC |
| PART NUMBER | (Prefix)(CS) - (Inside Dia) - (Height) |
 |
Standard - Height and cross section are equal, thus giving a square seal. Utilizes type 'D' lip. Typical Part Number UPU25-2.50 |
 |
Deep - Utilizes the same 'D' lip, but the seal height is greater than the cross section, thus giving a rectangular shape. Typical Part Number UPU25-2.50-37D |
 |
Type SQB - Same dimensions as the Standard seal. Beveled lip design provides better film breaking. Utilizes type 'B' lip. Typical Part Number UPU25-2.50-SQB |
 |
Type B - Same dimensions as the Deep seal. Beveled lip design provides better film breaking. Utilizes type 'B' lip. Typical Part Number UPU25-2.50-37B |
Utilizing a double lip of nitrile bonded to a carbon steel case, this wiper prevents contaminant ingression at the wiping lip and around the outer case.
| SEAL INFORMATION | |
|---|---|
| MATERIAL | 80A NITRILE |
| TEMPERATURE RANGE | -20° to +250° F |
| PART NUMBER | (Prefix) - (ID) x (OD) X (H) |
Incorporating a nitrile / fabric seal with two split bearing this assembly affords low friction and high strength for one or two piece pistons.
| SEAL INFORMATION | |||
|---|---|---|---|
| MATERIAL | 70A NBR / FABRIC SEAL OD 70A NBR SEAL ID ACETAL BEARING |
||
| TEMPERATURE RANGE | -22° TO +212° F | ||
| PRESSURE RANGE | 0 TO 5,000 PSI | ||
Fabricated from woven fabric and polyester resins, this material can be cut to length to fit rod or piston grooves.
NOTE: List Price = 1 Foot (12")
TQ16 - Sold in rolls of 16 foot sections
| SEAL INFORMATION | |||
|---|---|---|---|
| MATERIAL | FABRICATED REINFORCED POLYESTER | ||
| TEMPERATURE RANGE | -30° to +265° F | ||
| SPEED | 3 FT/SEC | ||
| COMPRESSIVE STRENGTH | 24,000 PSI | ||
| PART NUMBER | (Prefix) - (W) x (TH) | ||
Our 612F style flexible guide bearings, with a 1/8" radial thickness, offered in a boxed quantity. The strip can be cut to any length using anvil type pruning shears. Product length is 32' per box.
| SEAL INFORMATION | |||
|---|---|---|---|
| MATERIAL | FABRICATED REINFORCED POLYESTER | ||
| TEMPERATURE RANGE | -40° to +250° F | ||
| TENSILE STRENGTH | 8,000 PSI | ||
| COMPRESSIVE STRENGTH | 24,000 PSI | ||
| SPEED | 3 FT/SEC | ||
| PART NUMBER | (Prefix) - (W) x (TH) | ||
Manufactured to a large variety of widths and thicknesses, this material affords low friction capabilities but with low compressive strength. The material also has the capability of ingesting metal particles and keeping them from the seal area.
NOTE: List Price = 1 Foot (12")
| SEAL INFORMATION | |||
|---|---|---|---|
| MATERIAL | 60% BRONZE FILLED PTFE | ||
| TEMPERATURE RANGE | -50° to +390° F | ||
| SPEED | 12 FT/SEC | ||
| COMPRESSIVE STRENGTH | 1,700 PSI | ||
| PART NUMBER | (Prefix) - (W) x (TH) | ||
Style PSA-58 piston seals combine a heavy duty, fabric reinforced seal with two polyacetal 'L' bearings. This construction allows the seal to withstand pressures up to 5,000 PSI. 'L' bearings also react to pressure to prevent extrusion and support the piston. For 2-piece pistons.
| SEAL INFORMATION | |
|---|---|
| MATERIAL | FABRIC REINFORCED NITRILE SEAL POLYACETAL ANTI-EXTRUSION RING |
| TEMPERATURE RANGE | -22° to +212° F |
| PRESSURE RANGE | 0 to 5,000 PSI |
| MAXIMUM SPEED | 1.5 ft / second |
| PART NUMBER | (Prefix)(Type of Seal) - (Size) |
