| SEAL INFORMATION | |
|---|---|
| MATERIAL | NYLON |
| TEMPERATURE RANGE | -40° to +220° F |
-
Molded from glass filled nylon, these step-cut bearings also act as retainers for Hydrolock vee sets. The following bore sizes are available. -
These parts are used as companion pieces for Cascade Vee Sets, used primarily as bearings. The bore sizes shown are nominal and are used in oversized bores of = .015 in. to = .030 in.
SEAL INFORMATION MATERIAL 60D POLYESTER TEMPERATURE RANGE -65° to +220° F SPEED FT/SEC PART NUMBER (Prefix) - (Bore Diameter) -
U-cup style buffer ring offers an asymmetric sealing lip profile, chamfered sealing edges, and pressure relieving capabilities to prevent inner pressure entrapment when employed in a tandem sealing system. This rod buffer seal is designed to absorb impact pressure fluctuations under high-load conditions thus increasing the life of the primary seal.SEAL INFORMATION MATERIAL URETHANE U-STYLE, POLYACETAL BACK-UP TEMPERATURE RANGE -40° to +230° F PRESSURE RANGE 0 to 8,000 PSI SPEED 3 FT/SEC PART NUMBER (Prefix)(CS) - (Inside Dia) - (O-Ring CS) / (Prefix)(CS) - (Inside Dia) - (Nom. Seal Height) -
Used interchangeably for piston or rod sealing, these u-seals employ the same tough urethane material found in our Heavy Duty Rod and Piston U-Seals. -
These seals are specifically designed to seal on their inside diameter and engineered to attain maximum life and reliability in dynamic rod sealing. They employ a hard plastic I.D. back-up ring to reduce the possibility of extrusion.
SEAL INFORMATION MATERIAL 92A URETHANE TEMPERATURE RANGE -40° to +230° F PRESSURE RANGE 0 to 6,000 PSI SPEED 3 FT/SEC PART NUMBER (Prefix)(CS) - (ID) - (Height) -
These seals are specifically designed to seal on their inside diameter and engineered to attain maximum life and reliability in dynamic rod sealing.
SEAL INFORMATION MATERIAL 92A URETHANE TEMPERATURE RANGE -65° to +230° F PRESSURE RANGE 0 to 6,000 PSI SPEED 3 FT/SEC PART NUMBER (Prefix)(CS) - (ID) - (Height) -
Style DRTU-BHT rod seals are molded in Freudenberg® AU 30000 urethane. These seals are specifically designed with a second lip on their inside diameter and engineered to attain maximum life and reliability in dynamic rod sealing. This feature results in reduced leakage, less friction, increased stability, and prevents air and contaminants from entering the cylinder. This high tear-resistant urethane demonstrates stability throughout a wide range of temperatures. In addition, this material is well suited to mineral and biodegradable hydraulic fluids as well as being resistant to hydrolysis.SEAL INFORMATION MATERIAL 94A URETHANE TEMPERATURE RANGE -31° to +250° F PRESSURE RANGE 0 to 7,250 PSI SPEED 1.5 FT/SEC PART NUMBER (Prefix)(CS) - (ID) - (Height) MAXIMUM EXTRUSION GAP PRESSURE 1000 PSI 3000 PSI 5000 PSI 6000 PSI MAX DIAM. GAP 0.032" 0.015" 0.012" 0.009" -
These seals are specifically designed with a second lip on their inside diameter and engineered to attain maximum life and reliability in dynamic rod sealing. This feature results in reduced leakage, less friction, increased stability and prevents air and contaminants from entering the cylinder.
SEAL INFORMATION MATERIAL 92A URETHANE TEMPERATURE RANGE -65° to +230° F PRESSURE RANGE 0 to 6,000 PSI SPEED 3 FT/SEC PART NUMBER (Prefix)(CS) - (ID) - (Height) MAXIMUM EXTRUSION GAP PRESSURE 1000 PSI 3000 PSI 5000 PSI 6000 PSI MAX DIAM.
GAP0.032" 0.015" 0.012" 0.009" -
Specifically designed as piston seals, these u-seals are engineered to seal on their outside diameter. They offer extended service life and maximum reliability in piston sealing. MAXIMUM EXTRUSION GAP PRESSURE / MAX. DIAM. GAP: | 1,000 PSI/.032 | | 3,000 PSI/.015 | | 5,000 PSI/.012 | | 6,000 PSI/.009 | -
One Piece Double Acting Piston Cups
This complete piston cup with a simple, one-piece construction serves the same purpose as a multi-assembly unit and is more economical with easy maintenance, dependability and long life. The unique piston cup consists of homogeneous rubber bonded to a zinc coated steel plate. The center hole may be enlarged to accommodate larger piston rods. Recommended for pneumatic and low-pressure hydraulic applications.SEAL INFORMATION MATERIAL RUBBER LIP, ZINC COATED STEEL PLATE TEMPERATURE RANGE -40° to +220° F PRESSURE RANGE 0 to 800 PSI SPEED 3 FT/SEC PART NUMBER (Prefix) - (Bore Size) -
Metal Clad WiperSEAL INFORMATION MATERIAL BUNA-N TEMPERATURE RANGE -22° to +212° F SPEED 3 FT/SEC PART NUMBER (Prefix) - (Size) -
NOTE: Caterpillar part numbers are used as a reference only. We do not imply that these parts are original equipment parts.
-
Out of stock
These lip-type buffer seals are designed for replacement in Caterpillar® cylinders. The hinged-lip design reduces friction, heat, and wear under low-pressure conditions and acts as a check valve allowing back-pressure relief. Seals for rod sizes 2-1/8" and under do not have a back-up ring. Caterpillar Specific Buffer Seals - DYR StyleCATERPILLAR DYR SEAL INFORMATION MATERIAL URETHANE TEMPERATURE RANGE -22° TO +230° F PRESSURE RANGE 0 to 6,000 PSI SPEED 3 FT/SEC 12 FT/SEC -
BRONZE FILLED PTFE ROD BUFFER SEALSEAL INFORMATION MATERIAL BRONZE FILLED PTFE SEAL
RUBBER ENERGIZERTEMPERATURE RANGE -40° TO +220° F PRESSURE RANGE 0 to 5,000 PSI SPEED 3 FT/SEC 12FT/SEC -
Caterpillar - 1 Piece Rod Buffer SealSEAL INFORMATION MATERIAL 92A URETHANE TEMPERATURE RANGE -40° TO +200° F PRESSURE RANGE 0 to 5,000 PSI SPEED 3 FT/SEC 12FT/SEC -
This wiper is a heavy duty scraper molded from a hard nylon material.
SEAL INFORMATION MATERIAL NYLON TEMPERATURE RANGE -40° to +212° F SPEED 3 FT/SEC PART NUMBER (Prefix) - (ID) x (OD) X (H)