MCU Heavy Duty Metal Clad
Utilizing a sturdy metal case, these wipers are molded from the same high performance urethane used in our Heavy Duty U-seals. Built for severe service, these wipers are capable of surviving hostile environments.
| SEAL INFORMATION | |
|---|---|
| MATERIAL | 92A URETHANE |
| TEMPERATURE RANGE | -65° to +230° F |
| PART NUMBER | (Prefix) - (Size) |
The Style TP-L seal is a zero drift piston seal for bi-directional pressure applications. The locking anti-extrusion rings provide for an easier installation. It is designed to retrofit O-Ring and standard T-seal grooves. The 70 shore A NBR is designed specifically for performance in compression type dynamic seals. Other features include a net molded dynamic sealing surface and backup chamfers.
| SEAL INFORMATION | |
|---|---|
| MATERIAL | BUNA-N RUBBER SEAL - HARD PLASTIC BACK-UPS |
| TEMPERATURE RANGE | -35° to +220° F |
| PRESSURE RANGE | 0 to 5,000 PSI |
| SPEED | 3 FT/SEC |
| PART NUMBER | (Prefix) - (Size) |
T-Seals are non-spiraling and extrusion resistant to 5,000 psi with improved tolerances.
IB = Intermediate Base, WB = Wide Base
Intermediate and Wide Base T-Seals are designed to fit MIL-5514F o-ring glands only and interchange with 1 o-ring / 1 back-up ring and 1 o-ring / 2 back-up ring grooves, respectively.
| SEAL INFORMATION | |
|---|---|
| MATERIAL | BUNA-N RUBBER SEAL - HARD PLASTIC BACK-UPS |
| TEMPERATURE RANGE | -35° to +220° F |
| PRESSURE RANGE | 0 to 5,000 PSI |
| SPEED | 3 FT/SEC |
| PART NUMBER | (Prefix) - (Size) |
Commonly used with metric o-rings, these back-up rings are made of virgin PTFE unless suffix specifies otherwise.
STANDARD IS VIRGIN PTFE
G = GLASS FILLED PTFE
B = BRONZE FILLED PTFE
CG = CARBON GRAPHITE FILLED PTFE
S = SPLIT RING
| SCS PART NUMBERS | ||||||
|---|---|---|---|---|---|---|
| MBT | - | 3 | X | 1.5 | X | 1.25 |
| Type of Seal | Inside Diameter |
Cross Section |
Width | |||
With a steel body, bronze liner and PTFE / lead overlay, these bushings possess excellent wearability and tremendous compressive strength.
| SEAL INFORMATION | |
|---|---|
| MATERIAL | BRONZE LINING PTFE/LEAD OVERLAY STEEL BACKING |
| TEMPERATURE RANGE | -325° to +536° F |
| SPEED | 12 FT/SEC |
| COMPRESSIVE STRENGTH | 44,000 PSI |
| PART NUMBER | (Prefix) - (ID) x (OD) X (H) |
Note: "SC" suffix designates a Scarf Cut wear ring.
| SEAL INFORMATION | |
|---|---|
| TEMPERATURE RANGE | -40° to +275° F |
| TENSILE STRENGTH | 27,000 PSI |
| COMPRESSIVE STRENGTH | 26,000 PSI |
| PART NUMBER | (PREFIX) - (OD) - (HT) |
| CROSS-SECTIONS | |
|---|---|
| 606 Prefix | 1/16" C/S |
| 608 Prefix | 5/64" C/S |
| 609 Prefix | 3/32" C/S |
| 610 Prefix | .1" C/S |
| 612 Prefix | 1/8" C/S |
| 616 Prefix | 3/16" C/S |
| 625 Prefix | 1/4" C/S |
Molded in PTFE with a rubber energizer, this seal absorbs the shock of pressure spikes protecting the rod seal.
| SEAL INFORMATION | |
|---|---|
| MATERIAL | FILLED PTFE BUFFER 70A NITRILE ENERGIZER |
| TEMPERATURE RANGE | -40° to +220° F |
| PRESSURE RANGE | 0 to 5,000 PSI |
| SPEED | 12 FT/SEC |
| PART NUMBER | (Prefix) - (ID) x (OD) x (H) |
Molded from 93 Shore A polyurethane with a 70 Shore A energizer, this seal utilizes the same groove dimensions as a standard o-ring to T-seal. One or two Style 575 back-up rings may be used for wider grooves. Extrusion resistant by design, this seal also is resistant to rolling and twisting. Installation is an easy two step snap-in procedure with no need to re-size before insertion into the bore. NOTE: Piston diameter 'I' dimensions are given for pistons without wear rings.
F= Fluorotrel, WB= Wide Base| SEAL INFORMATION | |
|---|---|
| MATERIAL | 93A URETHANE SEAL 70A NITRILE ENERGIZER |
| TEMPERATURE RANGE | -65° to +220° F |
| PRESSURE RANGE | 0 to 5,000 PSI |
| PART NUMBER | (Prefix) - (Size) |
NOTE: Piston diameter 'I' dimensions are given for pistons without wear rings.
| SEAL INFORMATION | |
|---|---|
| MATERIAL | 15% GLASS FILLED PTFE SEAL RUBBER ENERGIZER |
| TEMPERATURE RANGE | -40° to +220° F |
| PRESSURE RANGE | 0 to 5,000 PSI |
| SPEED | 12 FT/SEC |
| PART NUMBER | (Piston Seal)(Type of Seal) - (Size) |
| SEAL INFORMATION | |
|---|---|
| MATERIAL | 90A URETHANE |
| TEMPERATURE RANGE | -40° to +200° F |
| SPEED | 3 FT/SEC |
| PART NUMBER | (Prefix) (Size) |
This wiper is a single lip design molded from high grade nitrile and bonded to a carbon steel case.
| SEAL INFORMATION | |
|---|---|
| MATERIAL | NITRILE |
| TEMPERATURE RANGE | -30° to +220° F |
| PART NUMBER | (Prefix) - (ID) x (OD) X (H) |
The PS1800 provides low friction, high strength piston sealing. The PS1800 also provides double-acting piston sealing in a compact design that meets the requirements of ANSI/B93-32-1973. NOTE: Piston diameter 'I' dimensions are given for pistons without wear rings.
| SEAL INFORMATION | |
|---|---|
| MATERIAL | 15% GLASS FILLED PTFE SEAL RUBBER ENERGIZER |
| TEMPERATURE RANGE | -40° to +220° F |
| PRESSURE RANGE | 0 to 5,000 PSI |
| SPEED | 12 FT/SEC |
| PART NUMBER | (Piston Seal)(Type of Seal) - (Size) |
The individual vee rings and adaptors listed here are the same high quality product found in our assembled vee packing sets. Stocking individual vee rings allows you to assemble sets to your specific requirements.
RING TYPES
T = TOP ADAPTOR - NYLON
B = BOTTOM ADAPTOR - NYLON/
NEO-FAB
F = NEO-FAB VEE RING
U = URETHANE VEE RING
R = RUBBER VEE RING.
(FOR MORE RUBBER VEE RINGS
SEE OUR STYLE 835 RINGS)
| SEAL INFORMATION | |
|---|---|
| MATERIAL | NYLON, NEO-FAB URETHANE |
| TEMPERATURE RANGE | -35° to +220° F |
| PRESSURE RANGE | 0 to 5,000 PSI |
| SPEED | 1.5 FT/SEC |
| PART NUMBER | (Prefix) - (ID) (CS) (Type of Ring) |
