Molded from 70A nitrile for high sealability they employ a hard nylon anti-extrusion ring as a companion piece.
| SEAL INFORMATION | |
|---|---|
| MATERIAL | 70A NITRILE ACETAL BACK-UP |
| TEMPERATURE RANGE | -20° to +220° F |
| PRESSURE RANGE | 0 to 4,000 PSI |
| SPEED | 3 FT/SEC |
| PART NUMBER | (PREFIX) - (OD) |
Molded from 70A nitrile for high sealability they employ a hard nylon anti-extrusion ring as a companion piece.
| SEAL INFORMATION | |
|---|---|
| MATERIAL | 70A NITRILE ACETAL BACK-UP |
| TEMPERATURE RANGE | -20° to +220° F |
| PRESSURE RANGE | 0 to 4,000 PSI |
| SPEED | 3 FT/SEC |
| PART NUMBER | (PREFIX) - (OD) |
Molded from 70A nitrile for high sealability they employ a hard nylon anti-extrusion ring as a companion piece.
| SEAL INFORMATION | |
|---|---|
| MATERIAL | 70A NITRILE NYLON BACK-UP |
| TEMPERATURE RANGE | -20° to +220° F |
| PRESSURE RANGE | 0 to 3,000 PSI |
| SPEED | 3 FT/SEC |
| PART NUMBER | (PREFIX) - (OD) |
The MHMU style multi-lip rod u-seal combines the pressure-compensating, uni-directional characteristics of a u-seal with the multi-lip sealing effectiveness of compression-type stacked-packings. Made from premium materials, the MHMU utilizes several sealing lip edges for dry rod performance while minimizing friction. The multi-lip design maintains a critical sealing edge even though increasing pressure moves the line of contact down towards the heel.
| SEAL INFORMATION | |
|---|---|
| MATERIAL | URETHANE |
| TEMPERATURE RANGE | -50° to +230° F |
| PRESSURE RANGE | 0 to 5,000 PSI |
| SPEED | 3 FT/SEC |
| PART NUMBER | (Prefix) - (ID) x (OD) x (H) |
Fabricated from woven fabric and polyester resins, this material can be cut to length to fit rod or piston grooves.
NOTE: List Price = 1 Foot (12")
TQ16 - Sold in rolls of 16 foot sections
| SEAL INFORMATION | |||
|---|---|---|---|
| MATERIAL | FABRICATED REINFORCED POLYESTER | ||
| TEMPERATURE RANGE | -30° to +265° F | ||
| SPEED | 3 FT/SEC | ||
| COMPRESSIVE STRENGTH | 24,000 PSI | ||
| PART NUMBER | (Prefix) - (W) x (TH) | ||
Manufactured to a large variety of widths and thicknesses, this material affords low friction capabilities but with low compressive strength. The material also has the capability of ingesting metal particles and keeping them from the seal area.
NOTE: List Price = 1 Foot (12")
| SEAL INFORMATION | |||
|---|---|---|---|
| MATERIAL | 60% BRONZE FILLED PTFE | ||
| TEMPERATURE RANGE | -50° to +390° F | ||
| SPEED | 12 FT/SEC | ||
| COMPRESSIVE STRENGTH | 1,700 PSI | ||
| PART NUMBER | (Prefix) - (W) x (TH) | ||
With a steel body, bronze liner and PTFE / lead overlay, these bushings possess excellent wearability and tremendous compressive strength.
| SEAL INFORMATION | |
|---|---|
| MATERIAL | BRONZE LINING PTFE/LEAD OVERLAY STEEL BACKING |
| TEMPERATURE RANGE | -325° to +536° F |
| SPEED | 12 FT/SEC |
| COMPRESSIVE STRENGTH | 44,000 PSI |
| PART NUMBER | (Prefix) - (ID) x (OD) X (H) |
Molded in urethane with a steel case, this seal is double cased and used to exclude contaminants from cylinder link pins.
| SEAL INFORMATION | |
|---|---|
| MATERIAL | URETHANE LIP STEEL CASE STEEL CASE |
| TEMPERATURE RANGE | -30° to +200° F |
| SPEED | 3 FT/SEC |
Molded in nitrile with steel case, this seal is double cased and used to exclude contaminants from cylinder link pins.
Molded in nitrile, this wiper is for light duty applications.
| SEAL INFORMATION | |
|---|---|
| MATERIAL | NITRILE |
| TEMPERATURE RANGE | -22° to +212° F |
| SPEED | 3 FT/SEC |
| PART NUMBER | (Prefix) - (ID) x (OD) X (H) |
Molded from high grade urethane and bonded to a carbon steel case, this wiper utilizes a stainless steel finger spring to maintain a high radial force on the rod
| SEAL INFORMATION | |
|---|---|
| MATERIAL | URETHANE |
| TEMPERATURE RANGE | -40° to +200° F |
| PART NUMBER | (Prefix) - (ID) x (OD) X (H) |
This wiper is a single lip design molded from high grade nitrile and bonded to a carbon steel case.
| SEAL INFORMATION | |
|---|---|
| MATERIAL | NITRILE |
| TEMPERATURE RANGE | -30° to +220° F |
| PART NUMBER | (Prefix) - (ID) x (OD) X (H) |
This wiper is a single lip design molded from high grade urethane and bonded to a carbon steel case.
| SEAL INFORMATION | |
|---|---|
| MATERIAL | URETHANE |
| TEMPERATURE RANGE | -30° to +200° F |
| SPEED | 3 FT/SEC |
| PART NUMBER | (Prefix) - (ID) x (OD) X (H) |
This wiper is a molded from high grade urethane and bonded to a carbon steel case in a single lip design.
| SEAL INFORMATION | |
|---|---|
| MATERIAL | URETHANE |
| TEMPERATURE RANGE | -40° to +200° F |
| SPEED | 3 FT/SEC |
| PART NUMBER | (Prefix) - (ID) x (OD) X (H) |
This seal is single cased with a urethane lip and used to exclude contaminants from cylinder link pins.
| SEAL INFORMATION | |
|---|---|
| MATERIAL | URETHANE SEAL STEEL CASE |
| TEMPERATURE RANGE | -30° to +200° F |
| PART NUMBER | (Prefix) - (ID) x (OD) x (H) |
Molded in urethane, this wiper features a lip on the outer diameter to aid in contaminant exclusion.
| SEAL INFORMATION | |
|---|---|
| MATERIAL | URETHANE |
| TEMPERATURE RANGE | -30° to +200° F |
| SPEED | 3 FT/SEC |
| PART NUMBER | (Prefix) - (ID) x (OD) X (H) |
