| SEAL INFORMATION | |||
|---|---|---|---|
| MATERIAL | PTFE PISTON SEAL NYLON BACK-UP NITRILE ENERGIZER | ||
| TEMPERATURE RANGE | -40° to +220° F | ||
| PRESSURE RANGE | 0 to 6,000 PSI | ||
| SPEED | 4.5 FT/SEC | ||
| SUFFIX | BR= BRONZE FILLED PTFE CAP | ||
| PART NUMBER | (Prefix) - (OD) x (ID) x (W) | ||
-
This capped piston seal consists of a filled PTFE cap, a T-shaped NBR energizer, and two split nylon backup rings. It exhibits low friction, high sealability, and excellent resistance to extrusion and wear. -
Utilizing a double lip of nitrile bonded to a carbon steel case, this wiper prevents contaminant ingression at the wiping lip and around the outer case.
SEAL INFORMATION MATERIAL URETHANE TEMPERATURE RANGE -30° to +200° F SPEED 3 FT/SEC -
Utilizing a double lip of nitrile bonded to a carbon steel case, this wiper prevents contaminant ingression at the wiping lip and around the outer case.
SEAL INFORMATION MATERIAL 80A NITRILE TEMPERATURE RANGE -20° to +250° F PART NUMBER (Prefix) - (ID) x (OD) X (H) -
SEAL INFORMATION MATERIAL 95A DUROMETER URETHANE TEMPERATURE RANGE -40° to +200° F PART NUMBER (Prefix) - (ID) x (CS) x (W) SCS PART NUMBERS MBU - 6 X 2 X 1.3 Type of Seal Inside
DiameterCross
SectionWidth -
Commonly used with metric o-rings, these back-up rings are made of virgin PTFE unless suffix specifies otherwise.
STANDARD IS VIRGIN PTFE
G = GLASS FILLED PTFE
B = BRONZE FILLED PTFE
CG = CARBON GRAPHITE FILLED PTFE
S = SPLIT RINGSEAL INFORMATION MATERIAL PTFE TEMPERATURE RANGE -100° to +500° F PART NUMBER (Prefix) - (ID) x (CS) x (W) SCS PART NUMBERS MBT - 3 X 1.5 X 1.25 Type of Seal Inside
DiameterCross
SectionWidth -
SEAL INFORMATION MATERIAL BRONZE SPEED 3 FT/SEC PART NUMBER (Prefix) - (OD) x (W) x (RW) -
Placed in adjacent grooves on each side of style MPS piston seals they prevent cold flow or extrusion at high pressures.
SEAL INFORMATION MATERIAL NYLON TEMPERATURE RANGE -65° to +220° F PRESSURE RANGE 0 to 5,000 PSI PART NUMBER (Prefix) - (ID) x (CS) x (W) -
Hard nylon back-up rings for use with U-seals.
SEAL INFORMATION MATERIAL NYLON TEMPERATURE RANGE -67° to +212° F PRESSURE RANGE 0 to 5,000 PSI SPEED 3 FT/SEC PART NUMBER (Prefix) - (ID) - (C.S) - (W) SCS PART NUMBERS MBN - 75 X 2.5 X 2.5 Type of Seal Inside
DiameterCross
SectionWidth -
Installed as 2 halves in a closed groove, these bushings are found in many Japanese lift trucks.
SEAL INFORMATION MATERIAL 660 BRONZE SPEED 3 FT/SEC PART NUMBER (Prefix) - (ID) x (OD) X (H) -
External Retainer Rings
-
Internal Retainer Ring
-
This wiper is a heavy duty scraper molded from a hard nylon material.
SEAL INFORMATION MATERIAL NYLON TEMPERATURE RANGE -40° to +212° F SPEED 3 FT/SEC PART NUMBER (Prefix) - (ID) x (OD) X (H) -
These seals are specifically designed to seal on their inside diameter and engineered to attain maximum life and reliability in dynamic rod sealing. They employ a hard plastic I.D. back-up ring to reduce the possibility of extrusion.
SEAL INFORMATION MATERIAL 92A URETHANE TEMPERATURE RANGE -40° to +230° F PRESSURE RANGE 0 to 6,000 PSI SPEED 3 FT/SEC PART NUMBER (Prefix)(CS) - (ID) - (Height) -
These seals are specifically designed to seal on their inside diameter and engineered to attain maximum life and reliability in dynamic rod sealing.
SEAL INFORMATION MATERIAL 92A URETHANE TEMPERATURE RANGE -65° to +230° F PRESSURE RANGE 0 to 6,000 PSI SPEED 3 FT/SEC PART NUMBER (Prefix)(CS) - (ID) - (Height) -
These seals are specifically designed with a second lip on their inside diameter and engineered to attain maximum life and reliability in dynamic rod sealing. This feature results in reduced leakage, less friction, increased stability and prevents air and contaminants from entering the cylinder.
SEAL INFORMATION MATERIAL 92A URETHANE TEMPERATURE RANGE -65° to +230° F PRESSURE RANGE 0 to 6,000 PSI SPEED 3 FT/SEC PART NUMBER (Prefix)(CS) - (ID) - (Height) MAXIMUM EXTRUSION GAP PRESSURE 1000 PSI 3000 PSI 5000 PSI 6000 PSI MAX DIAM.
GAP0.032" 0.015" 0.012" 0.009"
