Molded in nitrile, this wiper is for light duty applications.
| SEAL INFORMATION | |
|---|---|
| MATERIAL | NITRILE |
| TEMPERATURE RANGE | -22° to +212° F |
| SPEED | 3 FT/SEC |
| PART NUMBER | (Prefix) - (ID) x (OD) X (H) |
-
-
This wiper is a heavy duty scraper molded from a hard nylon material.
SEAL INFORMATION MATERIAL NYLON TEMPERATURE RANGE -40° to +212° F SPEED 3 FT/SEC PART NUMBER (Prefix) - (ID) x (OD) X (H) -
SEAL RETAINER CROSS REFERENCE Hercules Sealing Prefix Ramsey Spirolox Prefix VH- UR- WH- RR- WHM- RRN- WHT- RRT- -
Split NylonSEAL INFORMATION MATERIAL NYLON TEMPERATURE RANGE -40 ° TO +250°F PRESSURE RANGE VARIES ACCORDING TO DIAMETRAL CLEARANCE PART NUMBER (Prefix) - (Dash No.) -
The Style PSC is a double acting piston seal designed to replace o-rings, quad-rings, and T-seals with the same groove dimensions (O-ring dash number). Style 575 urethane back-up rings may be added to either or both sides of the 'PSC' to accommodate wider groove widths. The PSC is made of 95A Durometer polyurethane, giving it high extrusion and abrasion resistance. The crowned sealing surface produces a positive seal from vacuum to high pressure.
NOTE: Piston diameter 'I' dimensions are given for pistons without wear rings.SEAL INFORMATION MATERIAL 95A POLYURETHANE SEAL
70 A NITRILE ENERGIZERTEMPERATURE RANGE -40° to +200° F PRESSURE RANGE 0 to 5,000 PSI SPEED 3 FT/SEC PART NUMBER (Prefix) - (O-Ring Size) - (Wide Base) These Style PSC are molded from Fluorotrel which is a tough, wear-resistant material able to run at temperatures up to 275° F. Fluorotrel is also resistant to fluids that are incompatible with polyurethane such as water, glycol, water in oil, mineral oil and petroleum. Consult our Engineering Department for other fluids compatible with Fluorotrel
NOTE: Piston diameter "I" dimensions are given for pistons without wear rings.SEAL INFORMATION MATERIAL 55D FLUOROTREL SEAL
70A NITRILE ENERGIZERTEMPERATURE RANGE -40° to +235° F PRESSURE RANGE 0 to 5,000 PSI PART NUMBER (Prefix) - (O-Ring Size) - (Fluorotrel) -
Style PSA-58 piston seals combine a heavy duty, fabric reinforced seal with two polyacetal 'L' bearings. This construction allows the seal to withstand pressures up to 5,000 PSI. 'L' bearings also react to pressure to prevent extrusion and support the piston. For 2-piece pistons.
SEAL INFORMATION MATERIAL FABRIC REINFORCED NITRILE SEAL POLYACETAL ANTI-EXTRUSION RING TEMPERATURE RANGE -22° to +212° F PRESSURE RANGE 0 to 5,000 PSI MAXIMUM SPEED 1.5 ft / second PART NUMBER (Prefix)(Type of Seal) - (Size) -
Molded in nitrile, this double lipped wiper is found in Toyota lift trucks.
SEAL INFORMATION MATERIAL NITRILE TEMPERATURE RANGE -49° to +212° F SPEED 3 FT/SEC PART NUMBER (Prefix) - (ID) x (OD) X (H) -
Suffix:
EI = Top adapter has an internal anti-extrusion ring.
DR = Dry-rod application. Pre-loaded male adapterSEAL INFORMATION MATERIAL FABRIC / RUBBER VEE RINGS
FABRIC / RUBBER OR ACETAL ADAPTORSTEMPERATURE RANGE -35° to +220° F PRESSURE RANGE 0 to 5,000 PSI SPEED 1.5 FT/SEC PART NUMBER (Prefix) - (ID) x (OD) x (H) -
Incorporating a rubber seal lip, a rubberized fabric heel and an acetal back-up ring. This seal provides excellent sealability and high extrusion resistance.
SEAL INFORMATION MATERIAL NBR 80 DURO SEAL
NEO-FAB HEEL
ACETAL ANTI-EXTRUSION RINGTEMPERATURE RANGE -22° to +212° F PRESSURE RANGE 0 to 6,000 PSI PART NUMBER (Prefix) - (ID) x (OD) x (H) -
Style ST-XL wipers are molded from premium urethane and are direct replacements for Style 'ST' or 'D' wipers. The outside diameter of the ring has a crush lip providing extra interference in the groove. A bead on the shoulder stops contaminants from entering through the groove. The inside diameter is ribbed to prevent pressure traps between the wiper and rod seal.
SEAL INFORMATION MATERIAL 94A URETHANE TEMPERATURE RANGE -40° to +230° F SPEED 3 FT/SEC PART NUMBER (Prefix) - (Size) - (Extra Lip) -
Suffix 'V' designates fluorocarbon material,'N' designates nitrile material, and 'HT' designates high temperature urethane.
SEAL INFORMATION MATERIAL 90A URETHANE TEMPERATURE RANGE -40° to +200° F
N: -40° to +225° F
V: -20° to +350° F
HT: -40° to +225° FSPEED 3 FT/SEC PART NUMBER (Prefix) - (Size) -
Flexible Guide Bearings are strips of filled PTFE. The material can be cut to any length to fit any rod or bore size without losing its concentricity. The filler material is shown below. NOTE: Glass filled material has a thickness tolerance of ±_.010 in. Bronze filled tolerance is ± .0025 in.
SEAL INFORMATION MATERIAL GLASS FILLED 60% BRONZE FILLED PTFE TEMPERATURE RANGE -50° to +400° F TENSILE STRENGTH 2,100 PSI COMPRESSIVE STRENGTH 1,500 PSI SPEED 12 FT/SEC PART NUMBER (Prefix) - (Width) B = Bronze Filled PTFE -
Our Style PSU piston seal, or uniring, is a laminated one piece double acting seal made of cast polyurethane. The tough outer layer is highly resistant to abrasion and is impregnated with molybdenum disulfide to reduce friction. The softer inner layer acts as a static seal and also energizes the OD to make full contact with the bore. This seal may be used to replace an existing Uniring or other seals of the same dimensions - O-rings, O-rings with back-ups, T-seals, U-seals, etc. NOTE: Piston diameter 'I' dimensions are given for pistons without wear rings.
SEAL INFORMATION MATERIAL 60D & 57A
URETHANE COMPOSITETEMPERATURE RANGE -65° to +220° F PRESSURE RANGE 0 to 5,000 PSI SPEED 3 FT/SEC PART NUMBER (Prefix) - (OD) x (ID) x (Groove Width) -
Employed mainly in cylinders made by Cascade Corp., these vee sets are often over-sized or are different from standard vee sets. They are often used with Follower bearings.SEAL INFORMATION MATERIAL FABRIC REINFORCED RUBBER AND URETHANE RINGS/NYLON ADAPTORS TEMPERATURE RANGE -35° to +220° F PRESSURE RANGE 0 to 10,000 PSI SPEED 1.5 FT/SEC PART NUMBER (Prefix) (ID) (CS) X (Height) -
Molded in Bronze Filled PTFE with a rubber energizer, this seal absorbs the shock of pressure spikes to protect the rod seal.SEAL INFORMATION MATERIAL BRONZE FILLED PTFE SEAL RUBBER ENERGIZER TEMPERATURE RANGE -40° to +220° F PRESSURE RANGE 0 to 5,000 PSI SPEED 12 FT/SEC PART NUMBER (Prefix)(CS) - (Inside Dia)(O-Ring CS) -
This wear ring is molded from glass reinforced nylon. This style is highly recommended because of their wear rate and non-scoring properties and their ability to ingest metal chips.
SEAL INFORMATION MATERIAL NYLON TEMPERATURE RANGE -40° to +275° F SPEED 3 FT/SEC COMPRESSIVE STRENGTH 26,000 PSI TENSILE STRENGTH 25,000 PSI PART NUMBER (Prefix) - (OD) x (W) x (CS)