A wide range of ST wipers are now offered in the slotted heel design. The slots in the heel allow excess hydraulic fluid to bypass the wiper, preventing wiper blowout.
| SEAL INFORMATION | |
|---|---|
| MATERIAL | 90A URETHANE |
| TEMPERATURE RANGE | URETHANE: -40° to +200° F |
| SPEED | 3 FT/SEC |
| PART NUMBER | (Prefix) - (Size) - (Slotted Heel) |
Style ST-XL wipers are molded from premium urethane and are direct replacements for Style 'ST' or 'D' wipers. The outside diameter of the ring has a crush lip providing extra interference in the groove. A bead on the shoulder stops contaminants from entering through the groove. The inside diameter is ribbed to prevent pressure traps between the wiper and rod seal.
| SEAL INFORMATION | |
|---|---|
| MATERIAL | 94A URETHANE |
| TEMPERATURE RANGE | -40° to +230° F |
| SPEED | 3 FT/SEC |
| PART NUMBER | (Prefix) - (Size) - (Extra Lip) |
STXE wipers are designed to retrofit the standard ST wiper groove while providing superior performance. The o-ring energizer limits dirt intrusion around the O.D. of the wiper. The energizer also makes this wiper more effective in applications with severe side deflections.
| SEAL INFORMATION | |
|---|---|
| MATERIAL | URETHANE WIPER RUBBER ENERGIZER |
| TEMPERATURE RANGE | -40° to +220° F |
| SPEED | 3 FT/SEC |
| PART NUMBER | (Prefix) - (Size) |
| SEAL INFORMATION | |
|---|---|
| MATERIAL | BUNA-N |
| TEMPERATURE RANGE | -22° to +212° F |
| SPEED | 3 FT/SEC |
| PART NUMBER | (Prefix) (Size) |
| SEAL INFORMATION | |
|---|---|
| MATERIAL | BUNA-N |
| TEMPERATURE RANGE | -22° to +212° F |
| SPEED | 3 FT/SEC |
| PART NUMBER | (Prefix) (Size) |
| SEAL INFORMATION | |
|---|---|
| MATERIAL | BUNA-N |
| TEMPERATURE RANGE | -22° to +212° F |
| SPEED | 3 FT/SEC |
| PART NUMBER | (Prefix) (Size) |
| SEAL INFORMATION | |
|---|---|
| MATERIAL | BUNA-N RUBBER |
| TEMPERATURE RANGE | -40° TO +240°F |
| PRESSURE RANGE | VARIES ACCORDING TO DIAMETRAL CLEARANCE |
| PART NUMBER | (prefix) - (Dash No.) |
| SEAL INFORMATION | |
|---|---|
| MATERIAL | 90 DUROMETER, BUNA-N RUBBER |
| TEMPERATURE RANGE | -40° TO +240°F |
| PRESSURE RANGE | VARIES ACCORDING TO DIAMETRAL CLEARANCE |
| PART NUMBER | (prefix) (Dash No.) (90 Duro Fluorocarbon) |
| SEAL INFORMATION | |
|---|---|
| MATERIAL | FLUOROCARBON |
| TEMPERATURE RANGE | -20° TO +400° F |
| PRESSURE RANGE | VARIES ACCORDING TO DIAMETRAL CLEARANCE |
| PART NUMBER | (Prefix) - (Dash No.) - (90 Duro Fluorocarbon) |
| SEAL INFORMATION | |
|---|---|
| MATERIAL | BUNA-N RUBBER |
| TEMPERATURE RANGE | -40° TO +240°F |
| PRESSURE RANGE | VARIES ACCORDING TO DIAMETRAL CLEARANCE |
| PART NUMBER | (prefix) (Cord) - (Nom. Size) (Fluorocarbon) |
| SEAL INFORMATION | |
|---|---|
| MATERIAL | BLACK FLUOROCARBON |
| TEMPERATURE RANGE | -20° TO +400°F |
| PRESSURE RANGE | VARIES ACCORDING TO DIAMETRAL CLEARANCE |
| PART NUMBER | (Prefix) (Cord) - (Nom. Size.) (Fluorocarbon) |
| SEAL INFORMATION | |
|---|---|
| MATERIAL | BUNA-N RUBBER |
| TEMPERATURE RANGE | -40° TO +240° F |
| PRESSURE RANGE | VARIES ACCORDING TO DIAMETRAL CLEARANCE |
| SPEED | 3 FT/SEC |
| PART NUMBER | (Prefix) - (Dash No.) |
QR, BUNA-N QUAD RINGS
The four-lobed design of these seals provides twice the sealing surface of ordinary o-rings. They can be used in a variety of static and dynamic sealing applications including rotary, reciprocating or oscillating motion.
NOTE: Last three digits of part number corresponds to standard o-ring dash numbers (568-218 = QR-4218)
V = FLUOROCARBON
| SEAL INFORMATION | |
|---|---|
| MATERIAL | BUNA-N RUBBER |
| TEMPERATURE RANGE | -40° TO +240°F |
| PRESSURE RANGE | VARIES ACCORDING TO DIAMETRAL CLEARANCE |
| PART NUMBER | (Prefix) - (Dash No.) |
SFS SPLIT FLANGE SEALS
FOR 4-BOLT SPLIT FLANGE CONNECTORS
Flange seals are a one piece dual durometer urethane static seal. The black outer part is a tough, extrusion resistant 95 Durometer and the yellow inner layer is 57 Durometer that has low compression set and excellent sealing properties. These seals are a direct replacement for o-rings and do not require modification to any split flange groove.
| SEAL INFORMATION | |
|---|---|
| MATERIAL | URETHANE |
| TEMPERATURE RANGE | -40° TO +200°F |
| PRESSURE RANGE | 0 TO 3000 PSI |
| SPEED | STATIC |
| PART NUMBER | (Prefix) - (Dash No.) |
Molded of 55D Durometer Hytrel, these back-up rings provide excellent extrusion resistance and tolerance to fluids such as phosphate esters, hydraulic oil and water. Stretched for installation, they return quickly to their original size for easy installation.
NOTE: Sizes (Dash No.) corresponds to standard O-ring numbers
| SEAL INFORMATION | |
|---|---|
| MATERIAL | 55D HYTREL |
| TEMPERATURE RANGE | -65° TO +275°F |
| PRESSURE RANGE | VARIES ACCORDING TO DIAMETRAL CLEARANCE |
| PART NUMBER | (Prefix) - (Dash No.) |
Molded of 90A Durometer Buna-N Rubber, these 'Parback®' Style Dished Cross Section back-up rings provide excellent extrusion resistance. Stretched for installation, they return quickly to their original size for easy installation.
NOTE: Sizes (Dash No.) corresponds to standard O-ring numbers.
| SEAL INFORMATION | |
|---|---|
| MATERIAL | 90A BUNA-N RUBBER |
| TEMPERATURE RANGE | -40° TO +240°F |
| PRESSURE RANGE | VARIES ACCORDING TO DIAMETRAL CLEARANCE |
| PART NUMBER | (Prefix) - (Dash No.) |
Letter suffix:
T = Solid, ST = Split, TS = Spiral Cut, TW = .085 Wide
| SEAL INFORMATION | |
|---|---|
| MATERIAL | PTFE |
| TEMPERATURE RANGE | -325 ° TO +500°F |
| PRESSURE RANGE | VARIES ACCORDING TO DIAMETRAL CLEARANCE |
| PART NUMBER | (Prefix) - (Dash No.)(Config) |
| CROSS SECTIONS | |
|---|---|
| 000 Series | 1/16" C/S |
| 100 Series | 3/32" C/S |
| 200 Series | 1/8" C/S |
| 300 Series | 3/16" C/S |
| 400 Series | 1/4" C/S |
Molded of 95A Durometer Urethane these back-up rings provide excellent extrusion resistance. Stretched for installation, they return quickly to their original size for easy installation.
NOTE: Sizes (Dash No.) corresponds to standard o-ring numbers.
| SEAL INFORMATION | |
|---|---|
| MATERIAL | 95A DUROMETER URETHANE |
| TEMPERATURE RANGE | -65 ° TO +220°F |
| PRESSURE RANGE | VARIES ACCORDING TO DIAMETRAL CLEARANCE |
| PART NUMBER | (Prefix) - (Dash No.) |
