| SEAL INFORMATION | |
|---|---|
| MATERIAL | BUNA-N |
| TEMPERATURE RANGE | -22° to +212° F |
| SPEED | 3 FT/SEC |
| PART NUMBER | (Prefix) - (Size) |
-
Metal Clad Wiper -
Snap-In WiperSEAL INFORMATION MATERIAL NYLON TEMPERATURE RANGE -40° to +212° F SPEED 3 FT/SEC PART NUMBER (Prefix) - (Size) -
SEAL INFORMATION MATERIAL URETHANE TEMPERATURE RANGE -65 ° TO +220°F SPEED 3 FT/SEC PART NUMBER (prefix)(size) -
Buna-N Wiper Cord -
SEAL INFORMATION MATERIAL 90A URETHANE TEMPERATURE RANGE -40° to +200° F SPEED 3 FT/SEC PART NUMBER (Prefix) (Size) -
Suffix 'SH' designates slotted heel design, 'V' designates fluorocarbon material, and 'B' designates carboxilated nitrile material.
SEAL INFORMATION MATERIAL 90A URETHANE TEMPERATURE RANGE -40° to +200° F SPEED 3 FT/SEC PART NUMBER (Prefix) - (Size) -
SCS Powerbands®
SCS Sealing Products is pleased to introduce our new line of Powerband® tight tolerance premium wear-rings. Manufactured from a highly engineered blend of premium nylon, glass fiber, and PTFE, Powerbands® offer a high strength wear-ring for all cylinder applications, including those with minimal lubrication. And, with a coefficient of friction nearly 50% lower than our standard product, your cylinders will run smoother and more efficiently than ever.All Powerbands® are fully machined with cross-section tolerances of only ±0.001 in, chamfered corners, and scarf or angle-cut end gaps. Compared to standard tolerances of ±0.0025 in., this tightened tolerance improves the alignment and concentric operation of cylinder rods and pistons. The fully machined chamfered corners will better accommodate cylinder housing grooves, further improving piston and rod alignment. Lastly, the scarf-cut end gap reduces the loss of bearing support that may occur during cylinder side-loading. When combined, these features reduce the tolerance stack-up within the components of the cylinder. As a result, your cylinders will operate more consistently and be capable of operating at higher pressures and higher side loads than with standard wear-ring products. Furthermore, with this improved cylinder operation, your seals will last longer and the life of your cylinder will be extended. Powerbands® are currently available in our most popular wear-ring dimensions, as shown here. If you do not see your size or would like more information on this innovative product, please contact SCS.
SEAL INFORMATION TEMPERATURE RANGE -40° to +275° F TENSILE STRENGTH 20,000 PSI FLEXURAL STRENGTH 34,000 PSI COMPRESSIVE STRENGTH 20,000 PSI PART NUMBER (Prefix) - (OD) - (Height) -
These back-up rings, made from urethane or nylon, are commonly used as spacers for u-seals.
SEAL INFORMATION MATERIAL URETHANE, 70 SHORE D TEMPERATURE RANGE -40° to +250° F SPEED 3 FT/SEC PART NUMBER (Prefix) (CS) - (ID) - (Width) N = Nylon
S = Split
P = Hard Hytrel -
These parts are used as companion pieces for Cascade Vee Sets, used primarily as bearings. The bore sizes shown are nominal and are used in oversized bores of = .015 in. to = .030 in.
SEAL INFORMATION MATERIAL 60D POLYESTER TEMPERATURE RANGE -65° to +220° F SPEED FT/SEC PART NUMBER (Prefix) - (Bore Diameter) -
SEAL INFORMATION TENSILE STRENGTH 35,000 PSI YIELD STRENGTH 18,000 PSI PART NUMBER (Prefix) - (ID) (CS) - (Width) -
SEAL INFORMATION TEMPERATURE RANGE -40° to +250° F TENSILE STRENGTH 10,600 PSI COMPRESSIVE STRENGTH 34,000 PSI SPEED 3 FT/SEC PART NUMBER (Prefix) - (OD) (CS) - (Width) -
Style 614 rod bearings are available in nylon material. These products are used extensively in hydraulic cylinders due to their low rate of wear and non-scoring properties. Excellent for those heavy duty applications that require a sturdy bearing. Most of these bearings are solid, although some may be split.
SEAL INFORMATION TEMPERATURE RANGE -40° to +275° F TENSILE STRENGTH 25,000 PSI COMPRESSIVE STRENGTH 26,000 PSI PART NUMBER (Prefix) - (ID) - (Width) -
Manufactured using woven fabric-reinforced polyester resin, this material produces a dimensionally accurate rectangular strip which can be cut to any length. Low coefficient of friction and high compressive strength makes it an ideal bearing material. A common radial thickness of 1/8 in. allows the stacking of various widths. Size reference is marked every 6 in. on the strip. Available by the foot or rolls of 16 feet. Cutting is made easy by using Anvil type pruning shears. Wall tolerance ± .002 in., radial wall thickness = 0.124 to 0.121 in. Standard part numbers are gray in color.
TQ = Turquoise in color.SEAL INFORMATION TEMPERATURE RANGE -40° to +250° F TENSILE STRENGTH 8,000 PSI COMPRESSIVE STRENGTH 24,000 PSI SPEED 3 FT/SEC PART NUMBER (Prefix) - (Width) -
Our 612F style flexible guide bearings, with a 1/8" radial thickness, offered in a boxed quantity. The strip can be cut to any length using anvil type pruning shears. Product length is 32' per box.
SEAL INFORMATION MATERIAL FABRICATED REINFORCED POLYESTER TEMPERATURE RANGE -40° to +250° F TENSILE STRENGTH 8,000 PSI COMPRESSIVE STRENGTH 24,000 PSI SPEED 3 FT/SEC PART NUMBER (Prefix) - (W) x (TH) -
Flexible Guide Bearings are strips of filled PTFE. The material can be cut to any length to fit any rod or bore size without losing its concentricity. The filler material is shown below. NOTE: Glass filled material has a thickness tolerance of ±_.010 in. Bronze filled tolerance is ± .0025 in.
SEAL INFORMATION MATERIAL GLASS FILLED 60% BRONZE FILLED PTFE TEMPERATURE RANGE -50° to +400° F TENSILE STRENGTH 2,100 PSI COMPRESSIVE STRENGTH 1,500 PSI SPEED 12 FT/SEC PART NUMBER (Prefix) - (Width) B = Bronze Filled PTFE -
Note: "SC" suffix designates a Scarf Cut wear ring.
SEAL INFORMATION TEMPERATURE RANGE -40° to +275° F TENSILE STRENGTH 27,000 PSI COMPRESSIVE STRENGTH 26,000 PSI PART NUMBER (PREFIX) - (OD) - (HT) CROSS-SECTIONS 606 Prefix 1/16" C/S 608 Prefix 5/64" C/S 609 Prefix 3/32" C/S 610 Prefix .1" C/S 612 Prefix 1/8" C/S 616 Prefix 3/16" C/S 625 Prefix 1/4" C/S