Hard nylon back-up rings for use with U-seals.
| SEAL INFORMATION | |
|---|---|
| MATERIAL | NYLON |
| TEMPERATURE RANGE | -67° to +212° F |
| PRESSURE RANGE | 0 to 5,000 PSI |
| SPEED | 3 FT/SEC |
| PART NUMBER | (Prefix) - (ID) - (C.S) - (W) |
| SCS PART NUMBERS | ||||||
|---|---|---|---|---|---|---|
| MBN | - | 75 | X | 2.5 | X | 2.5 |
| Type of Seal | Inside Diameter |
Cross Section |
Width | |||
Placed in adjacent grooves on each side of style MPS piston seals they prevent cold flow or extrusion at high pressures.
| SEAL INFORMATION | |||
|---|---|---|---|
| MATERIAL | NYLON | ||
| TEMPERATURE RANGE | -65° to +220° F | ||
| PRESSURE RANGE | 0 to 5,000 PSI | ||
| PART NUMBER | (Prefix) - (ID) x (CS) x (W) | ||
Commonly used with metric o-rings, these back-up rings are made of virgin PTFE unless suffix specifies otherwise.
STANDARD IS VIRGIN PTFE
G = GLASS FILLED PTFE
B = BRONZE FILLED PTFE
CG = CARBON GRAPHITE FILLED PTFE
S = SPLIT RING
| SCS PART NUMBERS | ||||||
|---|---|---|---|---|---|---|
| MBT | - | 3 | X | 1.5 | X | 1.25 |
| Type of Seal | Inside Diameter |
Cross Section |
Width | |||
| SEAL INFORMATION | |
|---|---|
| MATERIAL | 95A DUROMETER URETHANE |
| TEMPERATURE RANGE | -40° to +200° F |
| PART NUMBER | (Prefix) - (ID) x (CS) x (W) |
| SCS PART NUMBERS | ||||||
|---|---|---|---|---|---|---|
| MBU | - | 6 | X | 2 | X | 1.3 |
| Type of Seal | Inside Diameter |
Cross Section |
Width | |||
Utilizing a double lip of nitrile bonded to a carbon steel case, this wiper prevents contaminant ingression at the wiping lip and around the outer case.
| SEAL INFORMATION | |
|---|---|
| MATERIAL | 80A NITRILE |
| TEMPERATURE RANGE | -20° to +250° F |
| PART NUMBER | (Prefix) - (ID) x (OD) X (H) |
Utilizing a double lip of nitrile bonded to a carbon steel case, this wiper prevents contaminant ingression at the wiping lip and around the outer case.
| SEAL INFORMATION | |
|---|---|
| MATERIAL | URETHANE |
| TEMPERATURE RANGE | -30° to +200° F |
| SPEED | 3 FT/SEC |
| SEAL INFORMATION | |||
|---|---|---|---|
| MATERIAL | PTFE PISTON SEAL NYLON BACK-UP NITRILE ENERGIZER | ||
| TEMPERATURE RANGE | -40° to +220° F | ||
| PRESSURE RANGE | 0 to 6,000 PSI | ||
| SPEED | 4.5 FT/SEC | ||
| SUFFIX | BR= BRONZE FILLED PTFE CAP | ||
| PART NUMBER | (Prefix) - (OD) x (ID) x (W) | ||
Molded in urethane, this wiper features a lip on the outer diameter to aid in contaminant exclusion.
| SEAL INFORMATION | |
|---|---|
| MATERIAL | URETHANE |
| TEMPERATURE RANGE | -30° to +200° F |
| SPEED | 3 FT/SEC |
| PART NUMBER | (Prefix) - (ID) x (OD) X (H) |
This seal is single cased with a urethane lip and used to exclude contaminants from cylinder link pins.
| SEAL INFORMATION | |
|---|---|
| MATERIAL | URETHANE SEAL STEEL CASE |
| TEMPERATURE RANGE | -30° to +200° F |
| PART NUMBER | (Prefix) - (ID) x (OD) x (H) |
This wiper is a molded from high grade urethane and bonded to a carbon steel case in a single lip design.
| SEAL INFORMATION | |
|---|---|
| MATERIAL | URETHANE |
| TEMPERATURE RANGE | -40° to +200° F |
| SPEED | 3 FT/SEC |
| PART NUMBER | (Prefix) - (ID) x (OD) X (H) |
This wiper is a single lip design molded from high grade urethane and bonded to a carbon steel case.
| SEAL INFORMATION | |
|---|---|
| MATERIAL | URETHANE |
| TEMPERATURE RANGE | -30° to +200° F |
| SPEED | 3 FT/SEC |
| PART NUMBER | (Prefix) - (ID) x (OD) X (H) |
This wiper is a single lip design molded from high grade nitrile and bonded to a carbon steel case.
| SEAL INFORMATION | |
|---|---|
| MATERIAL | NITRILE |
| TEMPERATURE RANGE | -30° to +220° F |
| PART NUMBER | (Prefix) - (ID) x (OD) X (H) |
Molded from high grade urethane and bonded to a carbon steel case, this wiper utilizes a stainless steel finger spring to maintain a high radial force on the rod
| SEAL INFORMATION | |
|---|---|
| MATERIAL | URETHANE |
| TEMPERATURE RANGE | -40° to +200° F |
| PART NUMBER | (Prefix) - (ID) x (OD) X (H) |
Molded in nitrile, this wiper is for light duty applications.
| SEAL INFORMATION | |
|---|---|
| MATERIAL | NITRILE |
| TEMPERATURE RANGE | -22° to +212° F |
| SPEED | 3 FT/SEC |
| PART NUMBER | (Prefix) - (ID) x (OD) X (H) |
Molded in nitrile with steel case, this seal is double cased and used to exclude contaminants from cylinder link pins.
