Machined from iron, most employ an over-lapped joint which allows the passing of ports.
| SEAL INFORMATION | |||
|---|---|---|---|
| MATERIAL | IRON | ||
| PART NUMBER | (Prefix) - (OD) x (W) x (RW) | ||
-
-
These rings are split for ease of installation and are retained in a groove. Their use is primarily to retain a single acting piston seal. Commonly they are used with MUFN style piston seals.
SEAL INFORMATION MATERIAL ACETAL TEMPERATURE RANGE -22° to +212° F PART NUMBER (Prefix) - (ID) x (OD) -
Molded in urethane, this wiper features a lip on the outer diameter to aid in contaminant exclusion.
SEAL INFORMATION MATERIAL URETHANE TEMPERATURE RANGE -30° to +200° F SPEED 3 FT/SEC PART NUMBER (Prefix) - (ID) x (OD) X (H) -
Molded in urethane, this wiper is flexible enough to easily snap into a groove yet tough enough to handle difficult rod wiping applications.
SEAL INFORMATION MATERIAL URETHANE TEMPERATURE RANGE -30° to +200° F SPEED 3 FT/SEC PART NUMBER (Prefix) - (ID) x (OD) X (H) -
Molded in urethane, this wiper features a double lip which prevents fluid that seeps by the rod seal from exiting the cylinder.
SEAL INFORMATION MATERIAL URETHANE TEMPERATURE RANGE -30° to +200° F SPEED 3 FT/SEC PART NUMBER (Prefix) - (ID) x (OD) X (H) -
This medium duty wiper is molded in nitrile rubber.
SEAL INFORMATION MATERIAL NITRILE TEMPERATURE RANGE -22° to +212° F SPEED 3 FT/SEC PART NUMBER (Prefix) - (ID) x (OD) X (H) -
This wiper features a lip on top of the shoulder which makes contact with the throat of the groove. This serves to prevent contaminants from entering the groove.
SEAL INFORMATION MATERIAL URETHANE TEMPERATURE RANGE -30° to +220° F PART NUMBER (Prefix) - (ID) x (OD) X (H) -
This light duty wiper is molded in polyurethane and features a double stepped shoulder to fit tightly in the gland throat.
SEAL INFORMATION MATERIAL URETHANE TEMPERATURE RANGE -22° to +212° F SPEED 3 FT/SEC PART NUMBER (Prefix) - (ID) x (OD) X (H) -
This is a single acting rod seal designed for low and high pressure sealing and is commonly found in telescopic cylinders. The seal consists of a molded rubber sealing lip, rubberized fabric hell. and a polyester header, for improved extrusion resistance.
SEAL INFORMATION MATERIAL RUBBER, FABRIC, POLYESTER ELASTOMER TEMPERATURE RANGE -22° to +212° F PRESSURE RANGE 0 to 5800 PSI SPEED 1.5 FT/SEC PART NUMBER (Prefix) - (ID) x (OD) x (Height) -
Incorporating a rubber seal lip, a rubberized fabric heel and an acetal back-up ring. This seal provides excellent sealability and high extrusion resistance.
SEAL INFORMATION MATERIAL NBR 80 DURO SEAL
NEO-FAB HEEL
ACETAL ANTI-EXTRUSION RINGTEMPERATURE RANGE -22° to +212° F PRESSURE RANGE 0 to 6,000 PSI PART NUMBER (Prefix) - (ID) x (OD) x (H) -
Incorporating a rubber seal lip and a rubberized fabric heel, this seal provides excellent sealability and high strength.
SEAL INFORMATION MATERIAL NITRILE / FABRIC BASE TEMPERATURE RANGE -22° to +212° F PRESSURE RANGE 0 to 2,900 PSI SPEED 1.5 FT/SEC PART NUMBER (Prefix) - (ID) x (OD) x (H) -
Constructed of a rubber seal lip with a rubberized fabric heel, these seals feature a poly-acetal bearing ring. These seals offer excellent sealing ability and high pressure capability. The solid lip area increases the radial interference for improved low-pressure sealing. Commonly are used with our MSR retention rings.
SEAL INFORMATION MATERIAL NITRILE / FABRIC BASE
ACETAL BEARINGTEMPERATURE RANGE -22° to +220° F PRESSURE RANGE 0 to 6,000 PSI SPEED 1.5 FT/SEC PART NUMBER (Prefix)-(ID) x (OD) x (H) -
Incorporating a rubber U-cup shape and a rubberized fabric heel, this seal provides excellent sealability and high strength. The 'U' shape design decreases the radial interference for a lower lip friction.
SEAL INFORMATION MATERIAL NITRILE / FABRIC BASE TEMPERATURE RANGE -22° to +212° F PRESSURE RANGE 0 to 2,900 PSI SPEED 1.5 FT/SEC PART NUMBER (Prefix) - (ID) x (OD) x (H) -
Constructed of a rubber seal lip with a rubberized fabric heel, these seals feature a poly-acetal bearing ring. These seals offer excellent sealing ability and high pressure capability. Commonly are used with our MSR retention rings.
SEAL INFORMATION MATERIAL NITRILE / FABRIC BASE
ACETAL BEARINGTEMPERATURE RANGE -22° to +220° F PRESSURE RANGE 0 to 6,000 PSI SPEED 1.5 FT/SEC PART NUMBER (Prefix)-(ID) x (OD) x (H) -
Molded from 90A nitrile, this seal provides high sealability in a symmetrical design suitable for rods or pistons.
SEAL INFORMATION MATERIAL 90A NITRILE TEMPERATURE RANGE -13° to +212° F PRESSURE RANGE 0 to 2,000 PSI SPEED 3 FT/SEC PART NUMBER (Prefix) - (ID) x (OD) x (H) -
Molded in polyurethane, these rotary pressure seals are specifically designed for use sin hydraulic swivel joints.
SEAL INFORMATION MATERIAL 92A URETHANE TEMPERATURE RANGE -50° to +220° F PRESSURE RANGE 0 to 5,000 PSI SPEED 3 FT/SEC PART NUMBER (Prefix) - (ID) x (OD) x (H)