Molded in urethane, this wiper is flexible enough to easily snap into a groove yet tough enough to handle difficult rod wiping applications.
| SEAL INFORMATION | |
|---|---|
| MATERIAL | URETHANE |
| TEMPERATURE RANGE | -30° to +200° F |
| SPEED | 3 FT/SEC |
| PART NUMBER | (Prefix) - (ID) x (OD) X (H) |
Suffix 'SH' designates slotted heel design, 'V' designates fluorocarbon material, and 'B' designates carboxilated nitrile material.
| SEAL INFORMATION | |
|---|---|
| MATERIAL | 90A URETHANE |
| TEMPERATURE RANGE | -40° to +200° F |
| SPEED | 3 FT/SEC |
| PART NUMBER | (Prefix) - (Size) |
Molded in urethane, this wiper features a double lip which prevents fluid that seeps by the rod seal from exiting the cylinder.
| SEAL INFORMATION | |
|---|---|
| MATERIAL | URETHANE |
| TEMPERATURE RANGE | -30° to +200° F |
| SPEED | 3 FT/SEC |
| PART NUMBER | (Prefix) - (ID) x (OD) X (H) |
A wide range of ST wipers are now offered in the slotted heel design. The slots in the heel allow excess hydraulic fluid to bypass the wiper, preventing wiper blowout.
| SEAL INFORMATION | |
|---|---|
| MATERIAL | 90A URETHANE |
| TEMPERATURE RANGE | URETHANE: -40° to +200° F |
| SPEED | 3 FT/SEC |
| PART NUMBER | (Prefix) - (Size) - (Slotted Heel) |
This wiper is a single lip design molded from high grade nitrile and bonded to a carbon steel case.
| SEAL INFORMATION | |
|---|---|
| MATERIAL | NITRILE |
| TEMPERATURE RANGE | -30° to +220° F |
| PART NUMBER | (Prefix) - (ID) x (OD) X (H) |
This light duty wiper is molded in polyurethane and features a double stepped shoulder to fit tightly in the gland throat.
| SEAL INFORMATION | |
|---|---|
| MATERIAL | URETHANE |
| TEMPERATURE RANGE | -22° to +212° F |
| SPEED | 3 FT/SEC |
| PART NUMBER | (Prefix) - (ID) x (OD) X (H) |
Molded in urethane, this wiper features a lip on the outer diameter to aid in contaminant exclusion.
| SEAL INFORMATION | |
|---|---|
| MATERIAL | URETHANE |
| TEMPERATURE RANGE | -30° to +200° F |
| SPEED | 3 FT/SEC |
| PART NUMBER | (Prefix) - (ID) x (OD) X (H) |
Molded in urethane, this wiper features a lip on the outer diameter to aid in contaminant exclusion.
| SEAL INFORMATION | |
|---|---|
| MATERIAL | URETHANE |
| TEMPERATURE RANGE | -30° to +200° F |
| SPEED | 3 FT/SEC |
| PART NUMBER | (Prefix) - (ID) x (OD) X (H) |
| SEAL INFORMATION | |
|---|---|
| MATERIAL | BUNA-N |
| TEMPERATURE RANGE | -22° to +212° F |
| SPEED | 3 FT/SEC |
| PART NUMBER | (Prefix) - (Size) |
This medium duty wiper is molded in nitrile rubber.
| SEAL INFORMATION | |
|---|---|
| MATERIAL | NITRILE |
| TEMPERATURE RANGE | -22° to +212° F |
| SPEED | 3 FT/SEC |
| PART NUMBER | (Prefix) - (ID) x (OD) X (H) |
Molded in nitrile, this double lipped wiper is found in Toyota lift trucks.
| SEAL INFORMATION | |
|---|---|
| MATERIAL | NITRILE |
| TEMPERATURE RANGE | -49° to +212° F |
| SPEED | 3 FT/SEC |
| PART NUMBER | (Prefix) - (ID) x (OD) X (H) |
Molded in nitrile, this wiper is for light duty applications.
| SEAL INFORMATION | |
|---|---|
| MATERIAL | NITRILE |
| TEMPERATURE RANGE | -22° to +212° F |
| SPEED | 3 FT/SEC |
| PART NUMBER | (Prefix) - (ID) x (OD) X (H) |
Style ST-XL wipers are molded from premium urethane and are direct replacements for Style 'ST' or 'D' wipers. The outside diameter of the ring has a crush lip providing extra interference in the groove. A bead on the shoulder stops contaminants from entering through the groove. The inside diameter is ribbed to prevent pressure traps between the wiper and rod seal.
| SEAL INFORMATION | |
|---|---|
| MATERIAL | 94A URETHANE |
| TEMPERATURE RANGE | -40° to +230° F |
| SPEED | 3 FT/SEC |
| PART NUMBER | (Prefix) - (Size) - (Extra Lip) |
Suffix 'V' designates fluorocarbon material,'N' designates nitrile material, and 'HT' designates high temperature urethane.
| SEAL INFORMATION | |
|---|---|
| MATERIAL | 90A URETHANE |
| TEMPERATURE RANGE | -40° to +200° F N: -40° to +225° F V: -20° to +350° F HT: -40° to +225° F |
| SPEED | 3 FT/SEC |
| PART NUMBER | (Prefix) - (Size) |
| SEAL INFORMATION | |
|---|---|
| MATERIAL | 90A URETHANE |
| TEMPERATURE RANGE | -40° to +200° F |
| SPEED | 3 FT/SEC |
| PART NUMBER | (Prefix) (Size) |
This wiper is a single lip design molded from high grade urethane and bonded to a carbon steel case.
| SEAL INFORMATION | |
|---|---|
| MATERIAL | URETHANE |
| TEMPERATURE RANGE | -30° to +200° F |
| SPEED | 3 FT/SEC |
| PART NUMBER | (Prefix) - (ID) x (OD) X (H) |
