Suffix 'SH' designates slotted heel design, 'V' designates fluorocarbon material, and 'B' designates carboxilated nitrile material.
| SEAL INFORMATION | |
|---|---|
| MATERIAL | 90A URETHANE |
| TEMPERATURE RANGE | -40° to +200° F |
| SPEED | 3 FT/SEC |
| PART NUMBER | (Prefix) - (Size) |
| SEAL INFORMATION | |
|---|---|
| MATERIAL | 90A URETHANE |
| TEMPERATURE RANGE | -40° to +200° F |
| SPEED | 3 FT/SEC |
| PART NUMBER | (Prefix) (Size) |
| SEAL INFORMATION | |
|---|---|
| MATERIAL | URETHANE |
| TEMPERATURE RANGE | -65 ° TO +220°F |
| SPEED | 3 FT/SEC |
| PART NUMBER | (prefix)(size) |
| SEAL INFORMATION | |
|---|---|
| MATERIAL | NYLON |
| TEMPERATURE RANGE | -40° to +212° F |
| SPEED | 3 FT/SEC |
| PART NUMBER | (Prefix) - (Size) |
| SEAL INFORMATION | |
|---|---|
| MATERIAL | BUNA-N |
| TEMPERATURE RANGE | -22° to +212° F |
| SPEED | 3 FT/SEC |
| PART NUMBER | (Prefix) - (Size) |
Suffix 'V' designates fluorocarbon material,'N' designates nitrile material, and 'HT' designates high temperature urethane.
| SEAL INFORMATION | |
|---|---|
| MATERIAL | 90A URETHANE |
| TEMPERATURE RANGE | -40° to +200° F N: -40° to +225° F V: -20° to +350° F HT: -40° to +225° F |
| SPEED | 3 FT/SEC |
| PART NUMBER | (Prefix) - (Size) |
A wide range of ST wipers are now offered in the slotted heel design. The slots in the heel allow excess hydraulic fluid to bypass the wiper, preventing wiper blowout.
| SEAL INFORMATION | |
|---|---|
| MATERIAL | 90A URETHANE |
| TEMPERATURE RANGE | URETHANE: -40° to +200° F |
| SPEED | 3 FT/SEC |
| PART NUMBER | (Prefix) - (Size) - (Slotted Heel) |
Style ST-XL wipers are molded from premium urethane and are direct replacements for Style 'ST' or 'D' wipers. The outside diameter of the ring has a crush lip providing extra interference in the groove. A bead on the shoulder stops contaminants from entering through the groove. The inside diameter is ribbed to prevent pressure traps between the wiper and rod seal.
| SEAL INFORMATION | |
|---|---|
| MATERIAL | 94A URETHANE |
| TEMPERATURE RANGE | -40° to +230° F |
| SPEED | 3 FT/SEC |
| PART NUMBER | (Prefix) - (Size) - (Extra Lip) |
STXE wipers are designed to retrofit the standard ST wiper groove while providing superior performance. The o-ring energizer limits dirt intrusion around the O.D. of the wiper. The energizer also makes this wiper more effective in applications with severe side deflections.
| SEAL INFORMATION | |
|---|---|
| MATERIAL | URETHANE WIPER RUBBER ENERGIZER |
| TEMPERATURE RANGE | -40° to +220° F |
| SPEED | 3 FT/SEC |
| PART NUMBER | (Prefix) - (Size) |
| SEAL INFORMATION | |
|---|---|
| MATERIAL | BUNA-N |
| TEMPERATURE RANGE | -22° to +212° F |
| SPEED | 3 FT/SEC |
| PART NUMBER | (Prefix) (Size) |
This wiper is a heavy duty scraper molded from a hard nylon material.
| SEAL INFORMATION | |
|---|---|
| MATERIAL | NYLON |
| TEMPERATURE RANGE | -40° to +212° F |
| SPEED | 3 FT/SEC |
| PART NUMBER | (Prefix) - (ID) x (OD) X (H) |
Utilizing a double lip of nitrile bonded to a carbon steel case, this wiper prevents contaminant ingression at the wiping lip and around the outer case.
| SEAL INFORMATION | |
|---|---|
| MATERIAL | 80A NITRILE |
| TEMPERATURE RANGE | -20° to +250° F |
| PART NUMBER | (Prefix) - (ID) x (OD) X (H) |
Utilizing a double lip of nitrile bonded to a carbon steel case, this wiper prevents contaminant ingression at the wiping lip and around the outer case.
| SEAL INFORMATION | |
|---|---|
| MATERIAL | URETHANE |
| TEMPERATURE RANGE | -30° to +200° F |
| SPEED | 3 FT/SEC |
Molded in urethane, this wiper features a lip on the outer diameter to aid in contaminant exclusion.
| SEAL INFORMATION | |
|---|---|
| MATERIAL | URETHANE |
| TEMPERATURE RANGE | -30° to +200° F |
| SPEED | 3 FT/SEC |
| PART NUMBER | (Prefix) - (ID) x (OD) X (H) |
This wiper is a molded from high grade urethane and bonded to a carbon steel case in a single lip design.
| SEAL INFORMATION | |
|---|---|
| MATERIAL | URETHANE |
| TEMPERATURE RANGE | -40° to +200° F |
| SPEED | 3 FT/SEC |
| PART NUMBER | (Prefix) - (ID) x (OD) X (H) |
