Molded in urethane, this wiper features a lip on the outer diameter to aid in contaminant exclusion.
| SEAL INFORMATION | |
|---|---|
| MATERIAL | URETHANE |
| TEMPERATURE RANGE | -30° to +200° F |
| SPEED | 3 FT/SEC |
| PART NUMBER | (Prefix) - (ID) x (OD) X (H) |
-
-
Suffix 'SH' designates slotted heel design, 'V' designates fluorocarbon material, and 'B' designates carboxilated nitrile material.
SEAL INFORMATION MATERIAL 90A URETHANE TEMPERATURE RANGE -40° to +200° F SPEED 3 FT/SEC PART NUMBER (Prefix) - (Size) -
This wiper is a single lip design molded from high grade nitrile and bonded to a carbon steel case.
SEAL INFORMATION MATERIAL NITRILE TEMPERATURE RANGE -30° to +220° F PART NUMBER (Prefix) - (ID) x (OD) X (H) -
Molded in urethane, this wiper is flexible enough to easily snap into a groove yet tough enough to handle difficult rod wiping applications.
SEAL INFORMATION MATERIAL URETHANE TEMPERATURE RANGE -30° to +200° F SPEED 3 FT/SEC PART NUMBER (Prefix) - (ID) x (OD) X (H) -
This light duty wiper is molded in polyurethane and features a double stepped shoulder to fit tightly in the gland throat.
SEAL INFORMATION MATERIAL URETHANE TEMPERATURE RANGE -22° to +212° F SPEED 3 FT/SEC PART NUMBER (Prefix) - (ID) x (OD) X (H) -
A wide range of ST wipers are now offered in the slotted heel design. The slots in the heel allow excess hydraulic fluid to bypass the wiper, preventing wiper blowout.
SEAL INFORMATION MATERIAL 90A URETHANE TEMPERATURE RANGE URETHANE: -40° to +200° F SPEED 3 FT/SEC PART NUMBER (Prefix) - (Size) - (Slotted Heel) -
This medium duty wiper is molded in nitrile rubber.
SEAL INFORMATION MATERIAL NITRILE TEMPERATURE RANGE -22° to +212° F SPEED 3 FT/SEC PART NUMBER (Prefix) - (ID) x (OD) X (H) -
Buna-N Wiper Cord -
SEAL INFORMATION MATERIAL 90A URETHANE TEMPERATURE RANGE -40° to +200° F SPEED 3 FT/SEC PART NUMBER (Prefix) (Size) -
Metal Clad WiperSEAL INFORMATION MATERIAL BUNA-N TEMPERATURE RANGE -22° to +212° F SPEED 3 FT/SEC PART NUMBER (Prefix) - (Size) -
Molded in urethane, this wiper features a double lip which prevents fluid that seeps by the rod seal from exiting the cylinder.
SEAL INFORMATION MATERIAL URETHANE TEMPERATURE RANGE -30° to +200° F SPEED 3 FT/SEC PART NUMBER (Prefix) - (ID) x (OD) X (H) -
Style ST-XL wipers are molded from premium urethane and are direct replacements for Style 'ST' or 'D' wipers. The outside diameter of the ring has a crush lip providing extra interference in the groove. A bead on the shoulder stops contaminants from entering through the groove. The inside diameter is ribbed to prevent pressure traps between the wiper and rod seal.
SEAL INFORMATION MATERIAL 94A URETHANE TEMPERATURE RANGE -40° to +230° F SPEED 3 FT/SEC PART NUMBER (Prefix) - (Size) - (Extra Lip) -
Suffix 'V' designates fluorocarbon material,'N' designates nitrile material, and 'HT' designates high temperature urethane.
SEAL INFORMATION MATERIAL 90A URETHANE TEMPERATURE RANGE -40° to +200° F
N: -40° to +225° F
V: -20° to +350° F
HT: -40° to +225° FSPEED 3 FT/SEC PART NUMBER (Prefix) - (Size) -
SEAL INFORMATION MATERIAL BUNA-N TEMPERATURE RANGE -22° to +212° F SPEED 3 FT/SEC PART NUMBER (Prefix) (Size) -
Molded in urethane, this wiper features a lip on the outer diameter to aid in contaminant exclusion.
SEAL INFORMATION MATERIAL URETHANE TEMPERATURE RANGE -30° to +200° F SPEED 3 FT/SEC PART NUMBER (Prefix) - (ID) x (OD) X (H) -
Snap-In WiperSEAL INFORMATION MATERIAL NYLON TEMPERATURE RANGE -40° to +212° F SPEED 3 FT/SEC PART NUMBER (Prefix) - (Size)