-
SEAL INFORMATION MATERIAL BRONZE SPEED 3 FT/SEC PART NUMBER (Prefix) - (OD) x (W) x (RW) -
Placed in adjacent grooves on each side of style MPS piston seals they prevent cold flow or extrusion at high pressures.
SEAL INFORMATION MATERIAL NYLON TEMPERATURE RANGE -65° to +220° F PRESSURE RANGE 0 to 5,000 PSI PART NUMBER (Prefix) - (ID) x (CS) x (W) -
Hard nylon back-up rings for use with U-seals.
SEAL INFORMATION MATERIAL NYLON TEMPERATURE RANGE -67° to +212° F PRESSURE RANGE 0 to 5,000 PSI SPEED 3 FT/SEC PART NUMBER (Prefix) - (ID) - (C.S) - (W) SCS PART NUMBERS MBN - 75 X 2.5 X 2.5 Type of Seal Inside
DiameterCross
SectionWidth -
Installed as 2 halves in a closed groove, these bushings are found in many Japanese lift trucks.
SEAL INFORMATION MATERIAL 660 BRONZE SPEED 3 FT/SEC PART NUMBER (Prefix) - (ID) x (OD) X (H) -
These back-up rings, made from urethane or nylon, are commonly used as spacers for u-seals.
SEAL INFORMATION MATERIAL URETHANE, 70 SHORE D TEMPERATURE RANGE -40° to +250° F SPEED 3 FT/SEC PART NUMBER (Prefix) (CS) - (ID) - (Width) N = Nylon
S = Split
P = Hard Hytrel -
External Retainer Rings
-
Internal Retainer Ring
-
Suffix 'N' designates nitrile material.
SEAL INFORMATION MATERIAL 90A URETHANE TEMPERATURE RANGE -40° to +200° F SPEED 3 FT/SPEED PART NUMBER (Prefix) (Size) -
Molded in Bronze Filled PTFE with a rubber energizer, this seal absorbs the shock of pressure spikes to protect the rod seal.SEAL INFORMATION MATERIAL BRONZE FILLED PTFE SEAL RUBBER ENERGIZER TEMPERATURE RANGE -40° to +220° F PRESSURE RANGE 0 to 5,000 PSI SPEED 12 FT/SEC PART NUMBER (Prefix)(CS) - (Inside Dia)(O-Ring CS) -
These vee sets utilize hytrel & nylon vees to cover pressure from 0 to 6,000 psi and provide excellent extrusion resistance. Male & female bearings are molded from glass filled nylon. NOTE: These vee sets do not contain guidelock bearings. They are sold seperately (designated by the 'HDLG-' product code prefix). FB = FEMALE BEARING, 1740 = 3 VEES, 1741 = 4 VEES, 1742 = 5 VEESSEAL INFORMATION MATERIAL HYTREL & NYLON TEMPERATURE RANGE -40° to +220° F PRESSURE RANGE 0 to 6,000 PSI SPEED 1.5 FT/SEC PART NUMBER (Prefix) - (# of vees) - (OD) - (Bearing Height) -
Suffix 'V' designates fluorocarbon material,'N' designates nitrile material, and 'HT' designates high temperature urethane.
SEAL INFORMATION MATERIAL 90A URETHANE TEMPERATURE RANGE -40° to +200° F
N: -40° to +225° F
V: -20° to +350° F
HT: -40° to +225° FSPEED 3 FT/SEC PART NUMBER (Prefix) - (Size) -
Style HU seals feature a reverse bevel lip design and are molded from high quality urethane. The balanced symmetrical design makes them ideal for rod or piston applications. V=FLUOROCARBON -
Style HSU u-seals are precision molded from 90 Dureometer Buna-N rubber or 90 A Fluorocarbon (suffix 'V') - 90 Duro Rubber for abrasion resistance and Fluorocarbon for heat resistance. These seals are commonly found in industrial cylinders, as piston, rod and cushion seals. -
Style HRU u-seals are precision molded from 80 Durometer Buna-N rubber. Sizes include those found in Army-Navy spec. AN6226 and narrow cross-section sizes found in J.I.C. cylinders and the popularly termed 'Huva Cup'. -
The HMU style multi-lip rod u-seal combines the pressure-compensating, uni-directional characteristics of a u-seal with the multi-lip sealing effectiveness of compression-type stacked-packings. Made from premium materials, the HMU utilizes several sealing lip edges for dry rod performance while minimizing friction. The multi-lip design maintains a critical sealing edge even though increasing pressure moves the line of contact down towards the heel. NOTE: If Product number ends in 'U' it's constructed of Polyurethane, if sku ends in 'N' or 'V' it's Homogenous. -
TThe HMU style multi-lip rod u-seal combines the pressure-compensating, uni-directional characteristics of a u-seal with the multi-lip sealing effectiveness of compression-type stacked-packings. Made from premium materials, the HMU utilizes several sealing lip edges for dry rod performance while minimizing friction. The multi-lip design maintains a critical sealing edge even though increasing pressure moves the line of contact down towards the heel. N=BUNA-N, V=FLUOROCARBON NOTE: If Product number ends in 'U' it's constructed of Polyurethane, if sku ends in 'N' or 'V' it's Homogenous.
