This light duty wiper is molded in polyurethane and features a double stepped shoulder to fit tightly in the gland throat.
| SEAL INFORMATION | |
|---|---|
| MATERIAL | URETHANE |
| TEMPERATURE RANGE | -22° to +212° F |
| SPEED | 3 FT/SEC |
| PART NUMBER | (Prefix) - (ID) x (OD) X (H) |
-
-
835 Homogeneous Rubber Vee RingsSEAL INFORMATION MATERIAL 70 DURO BUNA-N TEMPERATURE RANGE -40° to +220° F PRESSURE RANGE 0 to 1,250 PSI SPEED 3 FT/SEC PART NUMBER (Prefix) - (Size) -
EATON NAN SERIES INTERNAL RETAINER RINGS -
Style HRU u-seals are precision molded from 80 Durometer Buna-N rubber. Sizes include those found in Army-Navy spec. AN6226 and narrow cross-section sizes found in J.I.C. cylinders and the popularly termed 'Huva Cup'. -
A wide range of ST wipers are now offered in the slotted heel design. The slots in the heel allow excess hydraulic fluid to bypass the wiper, preventing wiper blowout.
SEAL INFORMATION MATERIAL 90A URETHANE TEMPERATURE RANGE URETHANE: -40° to +200° F SPEED 3 FT/SEC PART NUMBER (Prefix) - (Size) - (Slotted Heel) -
Utilizing tough polyurethane, these seals possess excellent wear and abrasion resistance. Symmetrical in design they can be used in rod or piston applications
E = EUROPEAN URETHANESEAL INFORMATION MATERIAL URETHANE TEMPERATURE RANGE -22° to +212° F PRESSURE RANGE 0 to 5,000 PSI SPEED 3 FT/SEC PART NUMBER (Prefix) - (ID) x (OD) x (H) -
Style ST wiper rings are precision molded from 90A durometer urethane. Flexible enough to easily snap into a groove yet tough enough to handle difficult rod wiping applications. 'V' tagged wipers are constructed of fluorocarbon.
Product Codes ending in SH are designed with a Slotted Heel. The slots in the heel allow excess hydraulic fluid to bypass the wiper, preventing wiper blowout.
SEAL INFORMATION MATERIAL URETHANE / FLUOROCARBON TEMPERATURE RANGE URETHANE: -40° to +200° F
FLUOROCARBON: -20° to +400° FSPEED 3 FT/SEC PART NUMBER (Prefix) - (Size) - (Alternative Mat.) -
Fabricated from fine woven fabric and phenolic resins, this wear ring is strong yet light weight with an excellent wear rate.
SEAL INFORMATION MATERIAL PHENOLIC TEMPERATURE RANGE -40° to +250° F SPEED 3 FT/SEC COMPRESSIVE STRENGTH 16,000 PSI TENSILE STRENGTH 10,600 PSI PART NUMBER (Prefix) - (OD) x (W) x (CS) -
This medium duty wiper is molded in nitrile rubber.
SEAL INFORMATION MATERIAL NITRILE TEMPERATURE RANGE -22° to +212° F SPEED 3 FT/SEC PART NUMBER (Prefix) - (ID) x (OD) X (H) -
Metal Clad Wiper - Rubber LipSEAL INFORMATION MATERIAL RUBBER TEMPERATURE RANGE -40° to +240° F SPEED 3 FT/SEC PART NUMBER (Prefix) - (Size) -
Note: "SC" suffix designates a Scarf Cut wear ring.
SEAL INFORMATION TEMPERATURE RANGE -40° to +275° F TENSILE STRENGTH 27,000 PSI COMPRESSIVE STRENGTH 26,000 PSI PART NUMBER (PREFIX) - (OD) - (HT) CROSS-SECTIONS 606 Prefix 1/16" C/S 608 Prefix 5/64" C/S 609 Prefix 3/32" C/S 610 Prefix .1" C/S 612 Prefix 1/8" C/S 616 Prefix 3/16" C/S 625 Prefix 1/4" C/S -
Metal Clad WiperSEAL INFORMATION MATERIAL BUNA-N TEMPERATURE RANGE -22° to +212° F SPEED 3 FT/SEC PART NUMBER (Prefix) - (Size) -
Molded from 90A nitrile, this seal provides high sealability in a symmetrical design suitable for rods or pistons.
SEAL INFORMATION MATERIAL 90A NITRILE TEMPERATURE RANGE -13° to +212° F PRESSURE RANGE 0 to 2,000 PSI SPEED 3 FT/SEC PART NUMBER (Prefix) - (ID) x (OD) x (H) -
SCS offers several sizes of standard sized metal clad oil seals. These seals are for rotating shafts and are specifically designed to prevent oil or grease leakage at maximum pressures of 10 PSI and temperature of 240 deg. F. Additional style and sizes are available upon request.
SEAL INFORMATION MATERIAL RUBBER TEMPERATURE RANGE -40° to +240° F PRESSURE RANGE 10 PSI MAXIMUM SPEED 3 FT/SEC PART NUMBER (Prefix) - (Size) - (Style) 
-
Molded in urethane, this wiper features a double lip which prevents fluid that seeps by the rod seal from exiting the cylinder.
SEAL INFORMATION MATERIAL URETHANE TEMPERATURE RANGE -30° to +200° F SPEED 3 FT/SEC PART NUMBER (Prefix) - (ID) x (OD) X (H)
